Bike Tools

Lower Leg Seal Driver Tool, 32,34,35,36,38,40mm Set

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

- 1/2" drive torque wrench (10-60Nm) - Features .5Nm adjustment increments and 72 ratcheting teeth in either direction

Torq Stick Torque Wrech - Pull & rotate to select your target torque value - Audible signal: Torque wrench clicks when preset torque is reached - Storage pen integrated with tool holder snaps to hold the Ratchet Stick together for riding or storage - Turn the ratchet wheel to tighten or loosen mounting bolt - 3, 4, 5 Allen bits, T20, T25 Torx bits included - Material: aluminum and engineering grade polymer body, hardened steel ratchet, S2 hardened steel bits

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The TW-6.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). Designed for higher torque settings for repairs and installation in the bottom bracket, cassette lockring and other areas that use a higher torque settings. For lower torque setting, see the TW-5. Comes with its own protective case. - 10–60 Newton meter range (88–530 Inch Pounds) - Adjustable in 0.25 Nm increments - Ratcheting 3/8" drive - Reads and registers for both left hand and right hand threading - Dial-adjust system allows desired torque setting to be preset - Calibrated to be accurate to +/- 4% - Length: 36.2cm (14.25")

The BKD-1.2 Hydraulic Brake Bleed Kit will bleed most models of DOT fluid-based hydraulic disc brakes, including models made by SRAM®, Formula®, Hayes®, and Hope®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance. The BKD-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case. Includes: - Two 20 mL syringes Two hose assemblies with shutoff clips - Two 10 mm/12 mm universal bleed blocks - Two 11 mm bleed blocks for Hayes® systems -  Two adjustable syringe holders -  M5 x 0.8 adapters— SRAM® (x2) -  M6 x 1.0 adapter— universal (x2) - Bleeding Edge-specific fitting — SRAM® -  Hose compression sleeve — universal -  Set of spare O-rings and hose -  Replacement parts available -  Brake fluid not included NOTE: The BKD-1.2 is for DOT fluid-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For mineral oil brake systems use the Park Tool BKM-1.2 Hydraulic Brake Bleed Kit — Mineral Oil.

- 1/4" drive torque wrench (3-15Nm) and bit sockets - Sockets include: 3/4/5/6/8mm hex, T25, and 90mm extension bar

• High quality precision tool; A must for the serious dealer / cyclist! • Adjustability from 3 to 15 Nm; for all stems / handlebars / seatposts etc • Incl. M3, M4, M5, M6, T25 & T30 Chrome Vanadium sockets and extension • Small and easy to use incl. storage-box

- Pro Mineral Oil V2 bleed kit includes: (2) premium syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting, and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Standard Mineral Oil V2 bleed kit includes: (2) standard syringes, M4 fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without Maxima mineral brake oil. Compatible with SRAM DB8 and Maven brakes - Pro DOT V2 Brake bleed Kit includes: (2) premium syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT 5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes - Standard DOT V2 brake bleed kit includes: (2) standard syringes/fittings, bleed blocks, Torx tool, crowfoot, Bleeding Edge Fitting and with or without DOT5.1 hydraulic fluid. Compatible with SRAM/Avid hydraulic DOT brakes

Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules

With today’s lightweight components, torque wrench use in the shop is no longer an option — it’s a must for every mechanic. The Park Tool TW-5.2 is a high-quality, ratcheting, click-type torque wrench that accurately measures and applies the proper amount of torque to a component’s threaded fastener(s). With a range of 2-14Nm, the TW-5.2 is designed for the lower torque settings that a shop or consumer would use for proper seat post, seat clamp and handlebar / stem applications. Comes with its own protective case.

Never be left looking for an errant wrench when you have Park's Metric Wrench Set. It includes 12 high quality Park metric wrenches from 6 to 17mm in diameter, featuring both box and open ends. They are all forged from chrome vanadium steel, then chrome plated for durability and dipped in Park Tool blue vinyl for outstanding comfort and ease of use.

The Muc-Off 8 in 1 Bicycle Cleaning Kit is perfect for any lover of bikes. Complete with Muc-Off's Nano Tech Bike Cleaner, Expanding Microcell Sponge, Soft Washing Brush, Detailing Brush, Claw Brush, Two Prong Brush, Bike Spray and Storage Tub this kit has pretty much everything you need to keep your bike looking nice and tidy. It makes a great Christmas or birthday gift for your bicycle-obsessed friends and family. This kit isn't style-specific either. No matter if you're into Road, MTB, Cyclocross or just getting from A to B, this 8-in-1 kit solves even the most annoying bike cleaning problems!

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

The Dynaplug Pill (aka Micro Pro) is an ergonomic, compact repair tool that quickly fixes most punctures in tubeless bike tires. - Perfect for race situations, as the wheel stays on the bike - Repair plugs are compatible with UST and tubeless ready tires (both ATB and Road) - Less mess! (fix tire without dumping sealant) - Made in USA from machined solid billet AL6061 - 42g Kit includes: x1—Pill tool (dimensions: 2.25" x 0.875") x5—Brass soft nose tip repair plugs x2—Insertion tubes x1—Micro knife x1—Air stopper x1—Pipe cleaner

The Dynaplug Racer Pro improves upon the legendary Racer's original design with Twin Tube technology. This allows you to store x4 pre-loaded plugs ready to go in a single tool. Snap-on caps protect plugs from dirt and damage. When your ready to make a repair, just pop off a cap to deploy either a standard size plug (with wheel-friendly soft brass tip) or the aluminum Megaplug for mega-big punctures. If you need more plugs just unthread the Twin Tube and flip it around for more plugging action! Machined in Chico, CA from US-made billet aluminum and stainless steel, the Racer Pro weighs 26g, only 2g more than the prior generation, yet delivers twice the puncture-defeating power! What's in the box: x1—Dynaplug Racer Pro Tool x1—Megaplug plug x3—Standard Plugs x1—Standard Twin Tube x1—Standard/Megaplug Twin Tube

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Pre-calibrated, torsion-beam-style torque wrench. Machined aluminum construction with removable handle and integrated magnet to hold tool bits in place. 2Nm – 10Nm torque capacity. No preset necessary-simply twist until marker lines up with desired torque setting. Includes soft shell carrying case with storage cutouts. - Weight: 190g Tool Bits - Hex 2, 2.5, 3, 4, 5, 6mm - Star Shaped T10, T25, T30 - Flat Head - Phillips-Head

- Tool required when removing Cannondale System Integrated, BB30 crank arms - Two piece tool for pressing arms away from the BB spindle

50 Hour Service Kit (Includes Air Can Seals, Piston Seal, Glide Rings) - Sidluxe A1 (2020)

- 50 hour service kit for Deluxe and Super Deluxe rear shocks - Includes air can seals, piston seal, and glide rings

A great shop accessory made to hold a wide variety of axles, spindles and any Park Tool Freewheel Remover/Lockring Tool. Made from precision extruded aluminum.

A fast and convenient tool to remove and install 12-spline Shimano/SRAM style cassette lockrings, as well as similar lockrings on rotor discs. The FR-5H features a modified FR-5 tool that allows use without removing most quick release skewer nuts. The removable, threaded steel handle makes it possible to replace a worn or damaged head. - Fits Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and other cassette lockrings - Also fits some Shimano disc brake lockrings

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit has a water bottle cage as well as everything needed for common road-side fixes: an eight-piece multi-tool, three tire levers, CO2 inflator & cartridges. - Lightweight composite water-bottle cage - Three MSW tire levers - Eight-piece flat pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Windstream Push-On CO2 inflator head - Two 20g CO2 cartridges

- Alloy body with chrome plated tools - Hex 2 / 2.5 / 3 / 4 / 5 / 6 / 8mm - PH2 screwdriver - Torx 10 / 26 - Chaintool - Spoke wrench 3.6 / 3.75 / 4.0 / 4.4mm - Chain holder - Tire lever - Brake pad spreader

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

A dirty drivetrain causes poor shifting and unnecessary wear to expensive parts. The Chain Gang contains everything needed to quickly and easily clean the chain, freewheel cogs, and chainrings. The Chain Gang includes: - CM-5.3 Cyclone Chain Scrubber - GSC-1 GearClean Brush - 8 oz. bottle of Bio ChainBrite The CG-2.4 works on nearly any bike, including multi-speed, single-speed, and e-bikes.

Park's Screw-Type Chain Tool is the ideal shop tool for easy and reliable chain maintenance and repair. The sliding shelf makes it compatible with 1/8th-inch chains and all 3/32nd-inch chains, from 5- to 11-speed. It's made from investment-cast tool steel and has long vinyl-coated handles and fine threading for easy chain pin removal. It also includes a stiff-link loosener and comes with an extra pin.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf