Skip to main content
Check Online: Order Status

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Assorted Bicycle Parts

$20.00
Spindle spacers and kits allow BB30 cranks to be used in a variety of BB shells. - Use this kit to install these SRAM and Quarq BB30 road cranks in BB386 frames: Force 22, S900, S950, Red power meter, DZero Carbon, DFour, Elsa, Riken
$17.99
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$34.99
GX Eagle Rear Derailleur Pulley Kit
$76.99
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R
$28.00
- Lever Internals Gen 2 Guide R/RE/DB5|Code R Qty 1
$111.00
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC
$19.99 - $21.99
Disc Brake Adaptors - Includes Stainless Bolts
$11.99
M15/M26 Alloy GXP Crank Arm Bolt Kit
$4.99
Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes
$18.00
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$4.49
- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4
$19.99
- SRAM, Road pulleys, 11.7515.060.000
$37.00
Rival eTap AXS Rear Derailleur Pulley Kit - Steel bearings - Includes 12T upper and 12T lower pulleys - 18.5mm and 12.9mm steel pulley screws
$8.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$38.99
Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes
$23.00
Trigger Clamp/Bolt Kit For X0 X9 X7
$48.99
Original equipment rear derailleur pulleys for SRAM rear derailleurs. Fits X01, X01DH, X1, GX 1x11, NX, Force CX1, Force 1, Rival 1, Apex 1 Derailleurs. - Wide-narrow pulley tooth profile holds the chain better - Stainless steel sealed cartridge bearings
$6.99
X01 Eagle Cable Anchor Kit
$39.00
Replacement hoods for SRAM hydraulic shifter/brake levers.
$27.99
- Superior sealing performance across a wide range of aftermarket applications - Integrated dust sealing lip is designed to guard against dirt and water entering fork preventing contamination and increasing performance - Integrated oil sealing lip preve
$59.00
The tool-free Maxle Lite brings exceptional stiffness and durability to your fork in a light, easiest-to-use expanding wedge thru-axle system. - Thread Length: 9mm - Thread Pitch: 15 x 1.5mm
$41.99
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$31.00 - $31.99
Rockshox Maxle Stealth is a light, low profile alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench
$70.00
- Pike and Pike DJ Solo Air 1 year service kit - Includes dust seals, foam rings, o-ring seals, Charger sealhead, SA sealhead
$49.50
IFP tubes pass through the inside of the IFP. - Fits Reverb and Reverb Stealth
$129.99
RockShox Reverb Remote Assembly for A1 generation Reverb and Reverb Stealth. - Includes remote Lever, MMX clamp, 1500mm of new hose, new hose barb, new strain relief - For "A1" designated posts, 2010-2012 - A1 posts have a silver return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
$65.99
RockShox Reverb Stealth Full Service Kit for A2 generation Reverb Stealth dropper seatposts - Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP) - Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing - For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP) - Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool - For "A2" designated posts, 2013-2016 - A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle - Updated service kit as of 06/2016
$14.99
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$0.25
Replacement lower hardware for Rockshox forks.
$15.99
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$15.99
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$88.00
The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. - Can be mounted above or below handlebars - Great match for SRAM 1x drivetrains - Tall clamp allows OneLoc to easily fit non-SRAM components
$16.00
RockShox 32mm Seal Kit for repair and maintenance of Rockshox suspension forks.
$9.99
Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.
$3.99
Tools for repair and maintenance of RockShox Reverb suspension seatposts. - Specific to RockShox Reverb post
$8.00
Replacement top caps for various RockShox suspension forks.
$14.99
- Break-Away Quick Disconnect - Two pieces: front derailleur / rear derailleur - Time-saving system for managing derailleur cables on Break-Away bikes - Light, threaded, alloy barrels with rubber noise dampener
$14.99
- Time saving system for managing brake cables on Break-Away bikes - Light threaded alloy barrels with rubber noise dampener
$14.99
Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.
$5.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.
$19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.
$3.99
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
$6.99
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
$17.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$6.99
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.
$8.99
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
$17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.
$39.99
The Problem Solvers GXP Spindle Adapter Kit lets you adapt a GXP crankset to a BB30 or Press-Fit 30 bottom bracket. It's used with the Problem Solvers BB30/Press-Fit 30 Adapter Kit, which is sold separately.
$12.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.
$9.99 - $11.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.
$14.99
The Problem Solvers Inner Chainring Bolts include 5 of the special threaded chainring bolts that fit into the chainring nuts on your crankset to hold the chainrings in place (chainring nuts sold separately). This type is 12.5mm long and made of durable chromoly.