Cranksets

e*thirteen's TRS Race carbon crankset is crafted from lightweight components, so you can hit the trails at full speed. - Features compression molded carbon fiber crankarms and a 73mm aluminum P3 Connect spindle for superior durability and weight savings - Spindle is located on the non-drive side of the crank for easier chainguide setup and drivetrain maintenance - Crank and spindle features Quick Connect lockring and Adaptive Preload Adjuster for easy chainring installation - The adjustable chainline accommodates non-Boost (142mm), Boost (148mm), and Super Boost (157mm) - Compatible with e*thirteen's SL Guiderings (28-38t options for non-Boost and Boost frames) and UL Guiderings (30-42t options for Super Boost frames) - Compatible with the following bottom bracket standards: 68/73mm threaded BSA, PF30, BB30, BB92 - Number of Chainrings: No Rings Included - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: e*Thirteen P3 Connect - Drivetrain Speeds: 11, 12 - Chainring BCD: Direct Mount e*Thirteen - BB Included: No

This Wheels Manufacturing Hollowtech II Crankarm Fixing Bolt for Shimano XTR, Saint, and XT cranks is an excellent replacement if yours is damaged or worked its way loose and was lost. It's required in order to set proper bottom bracket bearing preload.

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

- Sunlite Cottered Pins

• Compatible with mini hex chainrings

• Square taper interface • Only includes left crank • 175mm length

• Square taper interface • Only includes left crank

This very light, stiff, and strong carbon crank spider optimizes your power transfer. - Stiff and lightweight. - For use with S-Works carbon road cranks.

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Shimano Altus M311 cranksets provide durability and reliable shifting for triple chainring drivetrains. - Hyperdrive SG-X chainrings - 7/8-speed compatible - Spindle interface type: Square Taper JIS

Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS

The Shimano FC-M371 crankset for square bottom brackets features a rigid 2-piece construction and Hyperdrive SG-X chainrings. - Chain guard included - 9-speed

- SLX M7100 12 speed crankset - Fits Boost and non-Boost MTB - Hollow forged crank maximizes power transfer while limiting weight - Premium-looking two tone finish - Direct mount chainring type - Q-factor : 172mm - Chainline : 52mm

Shimano's Deore Crankset features efficiency and fast shifting to let you make the most out of the trails. Its smooth shifting rhythm maintains speed and acceleration over challenging terrain and provides optimized gear combinations and ratios for trail riding. Features: - HOLLOWTECH II Crankset (3x10-speed) - Efficient power transfer - HOLLOWTECH II crank arm with 4-arm construction - Composite chainring - Close step tooth profile for smooth shifting - Bottom Bracket compatibility: SM-BB52/BB-MT500-PA - Chain Line: 50

Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB

Shimano Dura-Ace Left Crank Arm. - Spindle Interface Type: Hollowtech II

An integral part of the Shimano Ultegra 12-speed road lineup, the FC-R8100 crankset builds upon Shimano's legendary front shifting and transmission efficiency. With new refinements for seamless 12-speed shifting, the Ultegra crank is now offered in a wide variety of lengths, bringing performance and improved fit for smaller riders, triathletes, and riders with specific biomechanic requirements. - Optimal balance of stiffness, strength, weight and rotational performance - Hollowglide structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

The Shimano Dura-Ace FC-R9200 crank performs two vital functions; transferring your pedaling effort into the drivetrain and ensuring the fastest, most precise front shifting available. With HOLLOWTECH II crank arms to ensure light weight and Shimano's class-leading chainring designs, the FC-R9200 won't let you down. - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWGLIDE structure cuts weight yet maintains strength for better power transfer and quicker, more precise front shifting - 148mm Q-factor - 44.5mm chainline

Offering all the precision and functionality of the DURA-ACE power meter, the ULTEGRA FC-R8100-P power meter comes in a more affordable package. Scientific training requires accurate measurement and user-friendliness, and the new ULTEGRA R8100 power meter has both. Its dual-sided measurement is accurate within 1.5% and zero offset calibration is a quick and easy process. Perhaps most importantly, its long battery life, easy recharge, and ANT+ and Bluetooth®LE connectivity makes using and recording your workouts easier than ever. Integrated, waterproof, and rechargeable Li-ion battery - Up to 300+ hours (TBD*) of ride time * Depending on ANT+/Bluetooth®LE settings Accurate data collection - ±1.5% (TBD*) strain gage accuracy throughout the entire calibration range * Depending on ANT+/Bluetooth®LE settings - Proprietary strain gauge Possible to start quickly - Simple zero offset calibration with switch on transmitter Active temperature compensation - Software automatically compensates for temperature changes

Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1

SRAM's S600 3.0 Crankset features forged arms for increased strength and reliability paired with smooth shifting chainrings for the best combination of looks, performance and price.

- Chainrings Included: Yes - Number of Chainrings: Single - Pedal Spindle: 9/16" - Rings: 42-tooth

Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included

The new X01 Eagle is our best, toughest, and most aggressive Trail and Enduro crankset thanks to DUB technology. The reengineered design, employing our proprietary CARBON TUNED lay-up technology, is built tough to handle aggressive lines through rock gardens and big hits wherever you find them. - DUB technology delivers the strongest, stiffest, lightest crankset available - All-new SRAM CARBON TUNED crank technology provides extreme stiffness and low weight - All-new chainring technology is designed specifically for Eagle chains and drivetrains - The X-SYNC2 chainring provides significantly quieter performance, with better mud clearing and extraordinary durability

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

CADET & CADET-HD | Updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of XC and trail riding. The Heavy Duty version is for those who tend to take the more rowdy line. So we reinforced the HD arms to take more of what you throw at it. - The Gen2 cranks (HD) Heavy Duty version is for those who tend to take the more rowdy line - Reinforced, solid forged arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Use 0mm offset ring = 55mm, 3mm offset ring = 52mm, 6mm offset ring = 49mm chainline - 3-bolt direct mount ring interface - Weight without BB or ring: 640g - Unauthorized online sales prohibited by manufacturer *M30 BB sold separately, use PX-9040 for English 68/73mm, PX-9012 for BB30/PF30 or PX-9013 for BB92

CADET & CADET-HD | Updated arm shaping and spacing, the new second-generation Cadet is perfect for all types of XC and trail riding. The Heavy Duty version is for those who tend to take the more rowdy line. So we reinforced the HD arms to take more of what you throw at it. - The Gen2 cranks (HD) Heavy Duty version is for those who tend to take the more rowdy line - Reinforced, solid forged arms with M30 (30mm drive/28mm non-drive) aluminum spindle - Use 0mm offset ring = 55mm, 3mm offset ring = 52mm, 6mm offset ring = 49mm chainline - 3-bolt direct mount ring interface - Weight without BB or ring: 640g - Unauthorized online sales prohibited by the manufacturer *M30 BB sold separately, use PX-9040 for English 68/73mm, PX-9012 for BB30/PF30 or PX-9013 for BB92

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.