Bicycle Inner Tubes

The name Airstop says it all. Michelin's Airstop tubes use a proprietary butyl rubber so your tires keep their pressure longer. And, the reinforced valve stem seam is ultra sturdy, too. - 98g - 52mm valve length

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Schrader Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

We're not afraid to say it—our Airlock Presta Valve Tubes are the best performing, self-sealing bicycle tubes available on the market. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for greater protection. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles.

We're not afraid to say it—our Airlock Schrader Valve Tubes are the best performing, self-sealing bicycle tubes available. That's because they feature our powerful Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Airlock sealant for the best chance of reducing punctures. - Non-toxic, non-separating formula. - Works continuously to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Nothing in the cycling world is more infuriating than flat tires. We get it, because we get them just like you. But with our Desert Protection Presta Valve Tubes, you can minimize, if not eliminate, flats at the terrible hands of debris, thorns, or whatever else is halting your rides. Starting at the basis of the construction, we designed the tube to be thicker at the outer side, the part against the tire, in order to stop pesky bits from puncturing all the way through the tube. We then make the inner side, the part against the rim, thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. We didn't stop there, however, as these tubes also feature our Airlock sealant that coats the tube for permanent protection against punctures. Not only this, but the sealant is designed to work continuously in order to prevent slow leaks from occurring, so erring complete catastrophe, you won't have to worry about flatting when you're riding over debris. We even addressed the common issue of sealant pooling with a completely homogenous design, so the tire/tube combo will always roll smooth and even. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings. - Sealant coats the tube for permanent protection against punctures. - Non-toxic, non-separating formula will last the life of your tube. - Designed to work continuously in order to prevent slow leaks. - Homogenous design prevents puddles with no need to shake. - Will not dry out like the many other sealants.

Because it's hard to know when you're going to get a flat, it's always good to have extra tubes on hand. Specialized's Turbo Ultralight MTB Tube w/Talc is lightweight to save rotational weight. The Talc lets the tube move easier inside the tire for a better ride with fewer flats.

- Size: 650B x 35 – 43 - ISO Diameter: 584 / 650b / 27.5" - ISO Width: 35mm, 36mm, 37mm, 38mm, 39mm, 40mm, 41mm, 42mm, 43mm - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Length: Short 32-40mm - Valve Shaft: Threaded - Weight: 83g

The least expensive way to ditch 40+ grams of rotating weight is with our Turbo Talc Tubes. A patented, oversized 4.8cm valve base prevents tearing, while a partially threaded valve stem provides a clean interface with pumps. Our lightest and most supple tube offering, it's also been proven in rolling-resistance testing to reduce drag by as much as 13% per wheel. - Packed in talc for easier installation. - 4.8cm valve base prevents issues of valves tearing off. - Smooth at the top for easier pump head insertion and reduced wear on pump internals. - Thinner tube design saves approximately 40 grams of rotating weight. - Thickness: 0.6mm

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Standard Schrader - Shaft Type: Smooth - Valve Core: Removable

- The original tube for flat protection - Non-toxic and environmentally safe - Protects against punctures up to 1/8-inch

- Labeled Size: 26 x 4.0 – 4.8 - ISO Width: 100mm – 120mm - ISO Diameter: 559 / 26" MTN - Wall Thickness: 1mm - Valve length: 32mm - Shaft Type: Threaded - Valve Core: Removable - Weight: 580g

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

When building your featherweight dream bike, don't forget the tubes! Michelin's Aircomp Ultralight tubes are nearly weightless for minimum rolling resistance and maximum speed. - 77g

- ISO Diameter: 584 / 650b / 27.5" - Tube Compound: Butyl - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded

Reducing rotating weight is one of the greatest improvements you can make to any bike, which is why Bontrager's Race X Lite Tube uses a 0.6mm wall thickness to keep the weight low. And, it's equipped with a removable valve core for easy sealant application and simple core replacement.

Your inner-tubes are one of the most critical components on your bike. Bontrager's are premium quality, standard weight tubes that keep you rolling. Get one more than you think you'll need—you can always use a spare.

- No more flats for 2 years! - Extra strong with Slime sealant inside - Instantly seals tread area punctures up to 1/8" (3mm) in size - Seals multiple punctures repeatedly - Non-toxic and non-flammable - Cleans up with water

- ISO Diameter: 507 / 24" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Core: Removable - Valve Shaft: Threaded Note: This product may have different packaging than pictured with a slightly different labelled size. Rest assured, the size range on the package will have the same or a broader functional range as the listed sizing of the product you ordered.

- Valve Type: Schrader - Valve Core: Removable - Butyl rubber - Wall Thickness: 0.9mm

Specialized's Standard Presta Tubes are lightweight, high quality, and available in a number of sizes; just the thing you need for a repair or a spare.

Your little ones have a youthful, intrepid spirit that sees them riding wherever the wind takes them. Most of the time, however, it takes them straight through thorns and debris, leaving you with the unenviable task of changing out flat after flat. But with our Standard Schrader Valve Youth Tubes, you'll have the peace of mind that they're riding on tough tubes that are built strong to last. And to make sure of it, they feature a molded method of construction that ensures a consistent thickness of butyl rubber— meaning that they'll roll smooth and stay tough, ride after ride. - Consistent thickness for the utmost in quality. - 32mm Schrader valve

We all love to stop and smell the roses, but like they say, every rose has its thorn. And as we all know, there's no better way to ruin a beautiful ride than with a thorn in the tube. No need to worry, though, because we designed our Thorn-Resistant Schrader Valve Tubes to combat pesky pricks of all shapes and sizes. Starting at the basis of the construction, we designed the tube to be thicker at the outer side (the part against the tire) in order to stop pesky bits from puncturing all the way through the tube. Then, at the inner side (the part against the rim), it's actually thinner in order to reduce weight. This way, you don't have to sacrifice performance in the name of protection. - Thicker construction on the outer side (against the tire) enhances puncture protection. - Thinner construction on the inner side (against the rim) maximizes weight savings.

Our Standard Presta Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700cx 23 – 25 also fits 27 x 7/8 – 1 - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

- ISO Diameter: 406 / 20" BMX - Tube Compound: Butyl - Wall Thickness: 0.9mm - Valve: Presta - Valve Shaft: Threaded - Valve Core: Removable

- ISO Diameter: 622 / road / 29" - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Length: Schrader - Valve Shaft: Smooth - Weight: 110g (23-25mm), 128g (28-32mm), 144g (35-43mm), 160g (40-45mm)

Our Standard Schrader Valve Tubes feature a molded method of construction that ensures a consistent thickness of butyl rubber. This means that they don't have any unnecessary weight and will roll smooth, ride after ride.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.