Cycling Shoes

MTB 4 Hole Cleat Receptacle Plate from Sidi.

Flat Pedal Friendly Mud Protection - Super tough, nylon faced neoprene upper with highly durable overlays - Novel, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section tread for added grip - Rear Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Reflective trim - Clean shoes, clean lines, muddy trails - Tight fit = clean shoes - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying

Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.

Key Benefits: -Full length Velcro® closure at rear -Reflective logo and panels at rear -Elasticated stirrups -Durable 3 layer nylon sole -Suitable for a variety of footwear and cleats

From sprinkles to downpours, our Rain Shoe Covers are built to keep feet dry and comfortable in wet weather. Fully taped seams and a breathable Polartec® NeoShell® membrane seal out wind and water while also letting sweat escape, so feet feel fresh all ride long. Designed to fit snugly over cycling shoes, the four-way stretch material makes them easy to get on and off. - Fully taped seams prevent water intrusion. - Polartec® NeoShell® fabric is breathable, stretchy, and completely waterproof. - Abrasion-resistant toe and heel sole with velcro closure. - Fabric Content: 65% Nylon, 35% Polyester.

Versatile Road Cleat For All Types of Riders For anyone unsure about which cleats to choose, the SM-SH11 are a great starting point. With their large float range and centered pivot point, Shimano’s Yellow SPD-SL cleats allow the toes to point in a wide range of angles and provide more room for error during set-up while still delivering an efficient connection between rider and bike. So if you're new to cycling, experience knee pain, lack flexibility, or simply don’t know where to begin, these cleats are your best bet. FEATURES: - SM-SH11 Yellow SPD-SL cleats come stock with most Shimano SPD-SL pedals and are a great choice for the majority of cyclists. They feature a six-degree float range (three degrees in each direction), which allows for free movement and low joint stress while still creating a solid connection between rider and bike. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls - Off-Bike Friendly: Cleat size and shape provide stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines injection molded main body with grip-enhancing TPU tips that are durable and maintain long lasting pedal engagement

There are some chilly days when you know that a pair of shoe covers will be overkill, but you'd rather keep your toes warm and worry about riding instead. That's where these toe covers fit in. They will keep your feet warm on cold and dry days. - Cut-outs for all current pedal systems - Reflective details at front - Fabric with versatile, medium thermal protection - GORE WINDSTOPPER Product: totally windproof, extremely breathable and water repellent - Lightweight material for easy storage - Reflective transfer print to mark right and left

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Extended length cleat slot (4mm) for rearward cleat set up option. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 395.9 grams

The 2FO DH Clip is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot FG rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort. - Extended length cleat slot (4mm) for rearward cleat set up option. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot FG rubber sole for confident traction. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Synthetic leather upper with added protection keeps you comfortable and is built to last. - Two-bolt cleat pattern fits all major mountain pedals. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The 2FO DH Flat is all about going fast and taking chances. Nearly vertical trail? No problem. Mega rock garden? Bring it on. Huge gap jump? Send it. Developed with the help of our world-class DH athletes and three-time reigning DH world champion Loic Bruni, we've built this shoe with the right amount of protection, hold, and style to give you the confidence to get sendy. Last but not least, a new SlipNot ST rubber sole delivers best-in-class pedal grip and connection when things get rowdy. It's the perfect shoe for going fast when the going gets gnarly. - Approximate weight: 395.9 grams - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Cushioned EVA foam midsole for comfort and impact absorption with shank layer for impact absorption and stability. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Reinforced upper protects and holds the foot to take on the gnarliest terrain with confidence. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time.

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

Versatility, thy name is SSR shoe! On-road, off-road, touring across the country, or commuting to the farmers' market—Bontrager's SSR Multisport cycling shoe will tackle it all. Its roomier fit and classic lace closure system deliver comfort and convenience, and the lugged, full-rubber outsole gives you all the traction you need for off-bike scrambles and adventures. - inForm Performance last offers our roomiest, most relaxed fit for comfort on and off the bike - Glass-reinforced nylon plate with textured rubber outsole for great grip - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt, SPD-style cleats - Plugs available for better flat pedal use when installed into cleat box using PN 563869 - Cleat compatibility: SPD 2-bolt - Closure type: Laces - Sole fiber content: 100% Rubber - Upper fiber content: 60.9% Polyester / 37.1% PU / 2% TPU - Liner fiber content: 100% Polyester

Versatility, thy name is SSR shoe! On-road, off-road, touring across the country, or commuting to the farmers' market. Bontrager's SSR Women's Multisport cycling shoe will tackle it all. Its roomier fit and classic lace closure system deliver comfort and convenience, and the lugged, full-rubber outsole gives you all the traction you need for off-bike scrambles and adventures. - inForm Performance last offers our roomiest, most relaxed fit for comfort on and off the bike - Glass-reinforced nylon plate with textured rubber outsole for great grip - Classic lace closure system with convenient elastic lace keeper - Compatible with 2-bolt, SPD-style cleats - Plugs available for better flat pedal use when installed into cleat box using PN 563869 - Sole fiber content: 100% Rubber - Upper fiber content: 60.9% Polyester / 37.1% PU / 2% TPU - Liner fiber content: 100% Polyester

If you're looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Approximate weight: 360g (1/2 pair, Size 42). - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - Cushioned EVA foam midsole for comfort and impact absorption. - Leather and textile upper with added protection keeps you comfortable and is built to last. - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection.

If you’re looking for a versatile MTB shoe that can transition from hot laps in the park to cold beers at the base without missing a step, then look no further. The 2FO Roost Flat brings a casual, relaxed vibe with all the right DNA to get sendy on the bike. It combines a durable leather and textile upper, cushioned EVA foam midsole and relaxed fit last that can stand up to the rigors of daily trail use without sacrificing off-the-bike comfort and style. Last but not least, a new SlipNot ST rubber sole delivers unsurpassed flat-pedal grip and connection when things get rowdy. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - SlipNot ST rubber sole for unsurpassed flat-pedal grip and connection - Leather and textile upper with added protection keeps you comfortable and is built to last. - Cushioned EVA foam midsole for comfort and impact absorption - Relaxed Fit last for a balance of pedal feel and off-the-bike comfort. - Approximate weight: 360g (1/2 pair, Size 42)

Body Geometry Footbeds are ergonomically designed and scientifically tested to increase power, endurance, and comfort by optimizing hip, knee, and foot alignment. With three different arch support options (Red+ being the lowest, Blue++ being in the middle, and Green+++ being tallest), you can be sure that every precious watt is preserved through the pedal stroke. - Body Geometry Footbeds measurably increase power, reduce time to exhaustion, and reduce injury by aligning hip, knee, and foot. - Customized longitudinal arch and metatarsal support with Red+, Blue++, or Green+++ contour. - Proprietary lightweight foam avoids taking a compression set for long-lasting performance. - Combine Body Geometry shoes, footbeds, and wedges to maximize performance benefits.

Rugged sole meets athletic spirit. The Gauge mountain bike shoes feature a lugged rubber outsole for traction with a stout injected-nylon inner shank to help transfer your power, so you can tame the trail. It combines cycling-specific features like clipless pedal compatibility and supportive fit, with the reliable grip of an aggressively lugged rubber outsole and the feel of a trail running shoe. With an upper made from supple synthetic fiber and breathable mesh, and a stout injected-nylon inner shank to help transfer your power to the pedals, it's a capable cycling shoe that gives you the confidence to take on any trail. Specs: - Upper Construction: Synchwire one-piece composite upper; Rockprint reinforced toe for abrasion resistance and durability; Synthetic heel overlay resists abrasion - Footbed: Die-cut EVA footbed - Outsole: Two-color rubber outsole, aggressive tread design - Weight: 405g (Size 43)

Rugged sole meets athletic spirit. The Gauge mountain bike shoes feature a lugged rubber outsole for traction with a stout injected-nylon inner shank to help transfer your power, so you can tame the trail. The Women's Gauge is an athletic approach to mountain bike footwear, made to inspire confidence for everything from spirited trail riding to soulful bikepacking adventures. It combines cycling-specific features like clipless pedal compatibility and supportive fit, with reliable grip of an aggressively lugged rubber outsole and the feel of a trail running shoe. With an upper made from supple synthetic fiber and breathable mesh, and a stout injected-nylon inner shank to help transfer your power to the pedals, it's a capable cycling shoe that gives you the confidence to take on any trail. Specs: - Upper Construction: Synchwire one-piece composite upper; Rockprint reinforced toe for abrasion resistance and durability; Synthetic heel overlay resists abrasion - Footbed: Die-cut EVA footbed - Outsole: Two-color rubber outsole, aggressive tread design - Weight: 396g (Size 39)

The 2FO Method melds unmatched pedal grip of our SlipNot™ compound with the stealthy style of a canvas upper and low-profile cut. With the SlipNot sole that propels riders like Loïc Bruni and Finn Iles to World Cup DH podiums, this casually stylish shoe can pull full-spectrum rowdiness from trail sessions to pump track to jump line to hanging out off the bike. - UNMATCHED GRIP: SlipNot™ rubber outsole offers unmatched traction, grip, and pedal feel. - STYLE & FEEL: Canvas upper sits into a cup sole for a lower profile and better pedal feel. - COMFORT: canvas upper offers ruggedness and breathability. - PADDED PERFORMANCE: Foam core midsole for vibration damping and cushioning. - STEALTHY SUPPORT: Internal heel counter adds support without bulk. - BODY GEOMETRY: Sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment.

This shoe cover is as committed as you are to riding through the wettest weather, thanks to three-layer waterproof/breathable fabric that blocks wind and stops rain in its tracks. The WRX Shoe cover works with both road and mountain bike shoes and can be used with standard footwear as well. (We suggest sizing up for flat pedal and street shoes). A two-stage hook and loop closure makes it easy to pull these on and keeps the elements at bay. BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Made with recycled materials - Compatible with road, mountain, and standard shoes - We suggest sizing up for mountain bike or street shoes - Three-layer waterproof breathable fabric blocks wind and water - Two-stage hook and loop closures for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 87% polyester, 13% nylon

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

Key Benefits: - Tough nylon faced neoprene upper - Offset rear zip with snap down puller and zip guard - Moulded rubber toe cap with treaded underside to help climb steep, muddy slopes - Asymmetric front seam for improved fit - Hard wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank rub protection - Reflective detailing - Suitable for MTB cleats only - 90 day Satisfaction Guarantee Design Philosophy Endura were among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. Improved Durability The stand out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulate layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. 90 Day Satisfaction Guarantee So confident are we in this product that, if you are not entirely satisfied with it then we offer a no-quibble refund or replacement policy within 90 days of purchase.

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single, lightweight Boa L6 dial that features tool-free snap replacement capability while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

The Republic R Knit offers undeniable style with Giro's engineered Xnetic Knit upper, which was developed for the specific needs of a cyclist. An internal TPU skeletal system provides support where you need it, while the knit offers suppleness for superior sock-like comfort. The upper is DWR-treated for water repellency and easy cleaning, and a rubber toe guard and bonded TPU heel increase durability and abrasion resistance. A new nylon and rubber co-molded outsole provides improved durability and better traction for stable footing on roads, sidewalks, and gravel when you're off the bike. - Engineered Xnetic Knit upper - Bonded TPU skeletal support structure - Rubber toe guard - DWR treated - Reflective Empire laces: hold a knot, durable and light - Co-molded nylon and rubber outsole with 2-bolt cleat mount - Mid-foot scuff guard - Molded EVA footbed with microsuede top sheet and medium arch support - Anti-microbial treatment - Weight: 310 grams (size 42)

The Ventana Fastlace was born and bred to navigate the demands of all-mountain adventures and all-day trail riding, when comfort and confidence are essential on the pedals and when you're hiking the trail. With a supportive fit, a sticky rubber outsole, and a Fastlace design, you can head out wherever the trail takes you in the Ventana mountain bike shoe. This shoe is built around a stout nylon shank proven on the DH World Cup circuit that powers the pedals like an XC shoe, combined with an injected EVA cushioning midsole and our exclusive Sensor rubber outsole that inspires confidence when scrambling over rocks and logs. The fit is supple and supportive with fast, easy adjustment via the Fastlace design, while a reinforced heel and toe box offer protection from scrapes and impacts. - One-piece Synchwire upper design with PU bonded mesh - High-friction Fastlace closure with cord lock and soft lace guides - Sensor rubber compound engineered for durability and grip - Hook and loop closure - Molded EVA footbed with medium arch support - Sensor rubber compound engineered for durability and grip - 408 grams (size 42)

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

THE APPROACHABLE, UNCOMPROMISED FLAT PEDAL SHOE They say the classics never go out of style. We say they only get better with age. Livewire was the shoe that started it all for us, taking the stage as the best budget-friendly flat pedal shoe on the market. Now upgraded to the soft and grippy MAX GRIP rubber outsole for improved grip and pedal feel, Livewire solidifies its legacy as a reliable shoe to live in, from the singletrack to the bike park, all without compromising style. Features: - MAX GRIP rubber outsole - EVA midsole provides support and shock absorption - Dual-density EVA insole provides additional support and cushion - Durable synthetic upper with anti-abrasion mesh for breathability - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - Custom molded toe and heel protection

Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread

Bike specific skate styled shoe perfect on or off the bike. Bearing the Iconic Hummvee name, the Hummvee Flat certainly has big shoes to fill. We don't use this name lightly however and certainly wouldn't have given this shoe this name if we didn't think it was deserved. Multi-use versatility is at the core of this shoe. It can be comfortably worn as a casual shoe around town, in the workshop or at the pub but is always ready for you to jump on your bike and go for a ride. The flex of the sole has been specifically engineered to balance all-day comfort with on bike performance and the StickyFoot™ Grip rubber compound of the sole ensures that you remain connected to your pedals no matter the terrain. So, don't be fooled by the casual looks, this shoe has been engineered to ride and is ready to take on whatever type of cycling you need it to. - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - StickyFoot Grip Rubber outsole keeps your feet firmly planted on the pedals - Flex Profile tuned to combine pedal-friendly stiffness and all-day walkability - Elasticated lace stash secures laces away from your crank and chain - Ortholite Recycled comfort footbed - Wild and mild lace options

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

High-performance road cycling shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

The Tempo Overcurve R5 is a quick-fit road cycling shoe to suit every rider and every ride. This shoe has been designed to deliver the essential timeless look and versatile performance to make every outing an enjoyable ride. The classic considerations of a road shoe have been redefined with a distinct Fizik identity and a smart form-fitting construction. The R5 Nylon composite outsole is supple and comfortable even in the long haul but without compromising pedaling efficiency. Overcurve is a shoe construction featuring a staggered collar that wraps around the ankle, tracing the natural misalignment of the ankle’s two bony protrusions: the lateral and medial malleoli. The result is an asymmetrical shape, with the throat of the shoe curving over the foot from its outside to its inner side. The closure is fast and secure, powered by a micro-adjustable BOA IP1 dial and a Velcro strap for a fine tune fit of the forefoot area. - Overcurve: asymmetrical construction that ergonomically conforms to the foot’s anatomy - Microtex upper: supple yet strong and durable for a comfortable and consistent fit - R5 nylon composite outsole: delivers balance between comfort and pedaling efficiency - BOA IP1-B dial - R5 outsole – carbon reinforced nylon

A quick-fit road cycling shoe to suit every rider and every ride. This shoe has been designed to deliver the essential timeless look and versatile performance to make every outing an enjoyable ride. The classic considerations of a road shoe have been redefined with a distinct Fizik identity and smart form-fitting construction. Overcurve is a shoe construction featuring a staggered collar that wraps around the ankle, tracing the natural misalignment of the ankle's two bony protrusions: the lateral and medial malleoli. The result is an asymmetrical shape, with the throat of the shoe curving over the foot from its outside to its inner side. The closure is fast and secure, powered by a micro-adjustable Boa IP1 dial and a Velcro strap for a fine tune fit of the forefoot area. The R5 Nylon composite outsole is supple and comfortable even in the long haul but without compromising pedaling efficiency. - Overcurve: asymmetrical construction that ergonomically conforms to the foot's anatomy - Microtex upper: supple yet strong and durable for a comfortable and consistent fit - R5 nylon composite outsole: delivers a balance between comfort and pedaling efficiency - Boa IP1-B dial - R5 outsole – carbon reinforced nylon - Weight: 246g (size 42 - 1/2 pair)

OUR ICONIC, NO-COMPROMISE ALL–MOUNTAIN FLAT With a dialed fit and proven MAX GRIP rubber outsole for ultimate grip and pedal feel, the award-winning Hellion Elite has established itself as the no-compromise all mountain shoe of choice. We didn't stop there. Our lightest shoe, the Hellion Elite has been upgraded once again with a premium recycled microfiber upper containing at least 30% recycled PET and an anti-bacterial mesh lining, improving breathability and comfort. An anti-abrasion toe and heel offer plenty of protection from trail obstacles and an EVA midsole offers additional support and cushioning. Features: - MAX GRIP rubber outsole - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Durable recycled microfiber upper (30% PET) is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection

OUR ICONIC, NO-COMPROMISE ALL–MOUNTAIN FLAT With a dialed fit and proven MAX GRIP rubber outsole for ultimate grip and pedal feel, the award-winning Hellion Elite has established itself as the no-compromise all-mountain shoe of choice. We didn't stop there. Our lightest shoe, the Hellion Elite has been upgraded once again with a premium recycled microfiber upper containing at least 30% recycled PET and an anti-bacterial mesh lining, improving breathability and comfort. An anti-abrasion toe and heel offer plenty of protection from trail obstacles and an EVA midsole offers additional support and cushioning. Features: - MAX GRIP rubber outsole - EVA midsole provides support and shock absorption - D3O High Impact Zone Technology insole absorbs impact and reduces fatigue - Durable recycled microfiber upper (30% PET) is abrasion and weather resistant - Anti-bacterial mesh lining controls odor - Fully gusseted tongue prohibits intake of dirt and debris - Elastic lace tuck to keep laces secure - Abrasion-resistant TPU toe and heel with internal toe protection

Built for high-alpine terrain, the Rime 2.0 brings rugged capability to ensure you can conquer any mountain trail. XPEL mesh lining sheds while you shred, preventing the shoe from becoming water-logged in creek crossings and will dry overnight. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating superb/unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - XPEL hydrophobic mesh construction reduces water absorption and dramatically improves drying time. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6-Snap dials for easy adjustment, backed by the Boa Lifetime Guarantee - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction - Relaxed Fit for a balance of pedal feel and off-bike comfort - Two-bolt cleat pattern fits all major mountain pedals. - Approximate weight: 384g (1/2 pair, size 42)

Built for high-alpine terrain, the Rime 2.0 Hydroguard brings rugged capability to ensure you can conquer any mountain trail in any conditions. The internal Hydroguard membrane helps keep your feet dry through stream crossings, puddles, and splashes and prevents the shoe from becoming water-logged. Our Lollipop midsole construction is paired with a gnarly Vibram rubber outsole creating unmatched off-bike push-ability for getting over any unrideable terrain. For closure, a standard lace is paired with an L6 Boa for a precise fit, on-bike adjustability, and redundancy to keep you riding when you're in the backcountry. - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Internal Hydroguard membrane keeps feet dry through puddles, splashes, and stream crossings. - Upper is treated with DWR for water repellency and easy cleaning. - Landing Strip cleat pocket is optimized for effortless foot-out riding style with platform clip pedals. - Boa L6 dials for easy adjustment, backed by the Boa Lifetime Guarantee. - Stiff Lollipop nylon composite plate for high performance pedaling and off-the-bike comfort. - Vibram rubber sole for confident traction. - Cushioned EVA foam midsole for comfort with molded heel cup for stability. - Relaxed Fit last for a balance of pedal feel and off-bike comfort. - Two-bolt cleat pattern fits all major mountain pedals.

Technical Trail performance Trainer Styling - Highly durable upper fabrics with perforated panels for enhanced ventilation - Low absorbency quick-dry lining - EGM footbed maximizes comfort and power transfer - StickyFoot Grip contact areas provide great connection with pedals - Toe and heel sections deploy StickyFoot Dura in an aggressive tread pattern to provide superb walking grip and durability. - Flex profile balances stiffness and flex for power transfer and control - Traditional laces and additional Velcro strap lock your feet in place - Tongue gaiter help keeps mud and dirt out - Sharkskin fabric lined heel cup helps hold foot in place - Reinforced toe and heel box offer protection from flying trail debris

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

A true all-terrain, all-road cycling shoe designed with a more generous fit for endless comfort, from gravel tracks to MTB trails, all-day adventures to extended bikepacking escapes, for riders who know no borders. TERRA ATLAS is our versatile and reliable all-rounder, for all-terrain gravel, mountain biking and beyond. - L6 BOA Fit System - X5 nylon outsole – with rubber tread, stiffness index 5 - Weight: 355g - Sizes: 36-48 (37 to 47 also in half sizes)

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

High-performance XC MTB racing shoe with advanced fit and pedaling technologies. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Off-set center flap mounted BOA L6 dial creates a sleeker profile with quick adjustments. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rubber XC racing pattern outsole promotes stable pedal engagement and secure walking grip. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency. - Perforated synthetic leather composite upper enables superior fit and breathability. - Lightweight glass fiber reinforced nylon sole for power transfer.

ERGOLACE X2 is a rugged, adaptable, lace-up mountain biking shoe that's true to the roots of off-road riding: tackling every kind of terrain, happy going up and downhill, on and off the bike. It's a trail and all-mountain shoe, and much more besides. Like a do-it-all-mountain bike, Terra X2 shoes are pure versatility in both function and form. Whether it's venturing on alpine tours, sessioning trails or simply escaping for an after-work ride, these shoes ask for adventure. The Ergolace pattern cradles the foot, securing the fit with an ergonomic lace-up closure. The upper offers protection from the elements: its hardwearing ripstop woven fabric resisting tearing and ripping. A PU-laminated toecap and side reinforcements add further protection and durability. We designed the silhouette specifically to reduce bulk and avoid the puffy look of many mountain biking shoes – it's ready to blend in with civilization when the backcountry missions are complete. The X2 outsole expresses the versatility of these shoes: engineered to deliver an optimal balance between efficient pedaling performance and flexibility for comfort and control, on and off the bike, so riders are covered for those hike-a-bike moments. The compressed-EVA midsole provides stability and cushioning, while the Vibram rubber tread ensures grip and traction, whatever the conditions underfoot. The directional lug pattern has been designed for confident footing on clipless pedals, with spacing and depth designed to bite into softer soil and a compound ideal for gripping on slick rocks. X2 has an extended cleat track, with more set back and greater flexibility for choosing cleat placement. - Ergolace: ergonomic lace-up closure for an anatomical fit - Ripstop fabric: woven fabric resistant to tearing and ripping - X2 outsole: nylon shank, EVA midsole and Vibram tread, stiffness index 3 - Weight: 329g (size 42 - 1/2 pair)

ROAD COMPETITION LEVEL SHOES INFUSED WITH S-PHYRE DNA. FEATURES - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Ultra-rigid hollow carbon midsole efficiently vents air and drains water. - Supple high-density synthetic leather with perforation and lightweight mesh/TPU combination bring superior fit and comfort. - Dual independent BOA® L6 dials allow quick, micro tension adjustments. - Adjustable powerzone lace guide securely holds forefoot. - SHIMANO DYNALAST promotes smoother pedaling and more efficient power transfer.

Value-Packed Performance Road Shoe Boasting a host of performance features, the RC302 is a value-packed road shoe for everyday riding. Designed for both comfort and speed, it employs an integrated seamless midsole and fiberglass-reinforced nylon sole to deliver a stiff and stable pedaling platform. Features: - The updated RC302 blends top-tier S-PHYRE race technology with a mid-tier price, delivering all-day comfort in a lightweight performance road shoe - Optimal Efficiency: Low stack height integrated midsole and new BOA fit system upper with instep strap provide stable pedaling platform and secure closure for enhanced power transfer - Breathability: Synthetic leather upper with strategically-placed perforations increases ventilation, keeping you cool and comfortable when the race is on - Dialed Fit: Surround wrapping upper accommodates broad range of foot shapes, while micro-adjustable BOA L6E dial enables a personalized fit - Options Abound: Available in three colorways and standard sizes from 40-48 (plus wide options from 40-52) mean there’s an ideal option for you and your style

Value-Packed Women’s Performance Road Shoe Boasting a host of performance features, the RC302W is a women’s specific road shoe for everyday riding. Designed for both comfort and speed, it employs an integrated seamless midsole and fiberglass-reinforced nylon sole to deliver a stiff and stable pedaling platform. Features: - The updated RC302W blends top-tier S-PHYRE race technology with a mid-tier price, delivering all-day comfort in a lightweight performance road shoe - Optimal Efficiency: Low stack height integrated midsole and new BOA fit system upper with instep strap provide stable pedaling platform and secure closure for enhanced power transfer - Breathability: Synthetic leather upper with strategically-placed perforations increases ventilation, keeping you cool and comfortable when the race is on - Dialed Fit: Women’s specific last and surround wrapping upper accommodate broad range of foot shapes, while micro-adjustable BOA L6E dial enables a personalized fit - Options Abound: Available in three colorways and standard sizes from 36-44 mean there’s an ideal option for you and your style

Whether you're clipping in for a session in your living room or a spin class at your favorite studio, the IC501 is thoughtfully designed to maximize your time in the saddle. Featuring breathable mesh construction on the top of the foot, SPD cleat compatibility, and a no-slip rubber sole that won't make it sound like you're walking around in tap shoes, this is a high-performance shoe that works as hard as you do. - Indoor Cycling Shoe: the IC501 is specifically designed for the demands of indoor cycling - Odor-busting Technology: FUZE treatment fights odor from sweat - SPD Cleats: compatible with most indoor cycling bikes - Maximum Efficiency: a stiff sole and tailored fit ensures optimal power transfer to the pedals - Precise Adjustment: easy-to-use BOA dial for a perfect fit, every time - Cleats sold separately

The Recon 1.0 was made for riders who set out on two wheels to seek the great outdoors and saddle up their bike for the adventure ahead, with the scientifically proven performance benefits of Body Geometry.The Recon 1.0’s purpose is to add confidence and functionality for riders who push their limits uphill for an unforgettable view, maybe are even clipping in for the first time, or are hopping on their trainer for an after-work hammer session on the spin bike. Comfort and versatility are key, and that’s what the Recon 1.0 was made for. Body Geometry: Like every Body Geometry shoe, the Recon 1.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 1.0 utilizes an L6 Boa Dial with soft-lace cables made from a Dyneema yarn, eliminating unwanted stretch while removing hard molded guides to give riders a more supple upper that comfortably conforms to the foot. Additionally, the outsole is optimized to put your power on the pedal through balanced stiffness. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling (stiffness index 6.0) - L6 BOA® Dial with soft-lace cables made from a Dyneema yarn. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 291g (1/2 pair, Size 42)

Take the performance and Body Geometry ergonomics of our high-end road shoes, put them in an affordable design, and you basically have the Torch 1.0 Road shoes. For the closure, we added a single lightweight Boa® L6 dial that features tool-free snap replacement capability, while also providing simple, on-the-fly micro-adjustments. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - With a 6.0 Stiffness index, the injection-molded nylon composite sole is engineered to be moderately stiff and plenty light. - Lightweight Boa® L6 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Synthetic upper with for supple feel over the foot. - Reflective heel elements increase your visibility to motorists in low-light conditions. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 290g (1/2 pair, Size 42)

The Recon 2.0 was made for riders who seek out dirt roads and challenging trails in search of a shoe that delivers comfort and efficiency in a durable package, with the scientifically proven performance benefits of Body Geometry. Whether you’re saddling up a Diverge or Creo to ride with your gravel group or hopping on your epic to embark on an all-day trail session, the Recon 2.0 is your partner in crime for days spent in the dirt. Body Geometry: Like every Body Geometry shoe, the Recon 2.0 is ergonomically designed and scientifically proven to improve comfort, increase performance, and reduce the chance of injury for every rider with patented technology, while improving power by 7 watts - validated by science. Stride Technology: Stride technology provides a flexible outsole and upper around the toe box combined with a stiff cleat pocket, enabling the shoe to easily flex when walking and remain stiff and efficient when pedaling. Efficiency: The Recon 2.0 features a Li2 Boa Dial for adjustability on the fly, making getting in and out of the shoe a breeze. BOA soft-lace cables made from a Dyneema yarn allow us to do away with hard molded guides for a more comfortable fit. The forefoot strap above the toes helps riders adjust volume around their toes to tailor the fit to their unique foot, connecting you to the bike for confidence when hitting a new feature or tackling loose and technical gravel. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Injection STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness index 6.0 - Welded upper reduces seams for superior step-in comfort. - BOA® Li2 dials for on-the-fly micro-adjustment. - SlipNot™ rubber tread for confident traction on all terrain. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 307g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

Whatever the journey, Sidi Aertis is there to make it easier and better. The comfort of a premium suede construction meets Firmor Closure technology to offer great lateral support. The nylon sole with replaceable rubber insert allows for maximum grip in any situation and increased walking comfort. -Designed for maximum lateral support the Firmor Closure contours the foot with a solid hold, and allows infinite size adjustment for the ideal individual fit -Sidi's Tecno-3 System dials in fit along the entire length of the shoe, adapting the upper to the shape of the foot for a customized fit -The closure uses a new proprietary Sidi Wire monofilament that is completely non-binding for intuitive and effortless on-the-fly adjustments -Like most Sidi small parts, the Tecno-3 System is serviceable and replaceable -The Sidi MTB SR17 sole represents the ultimate result in terms of stiffness for pedaling and flexibility for walking -The toe inserts are easily replaceable and offer the possibility to mount spikes for particularly muddy rides

LIGHTWEIGHT ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency.

LIGHTWEIGHT ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Low stack height midsole stabilizes foot and maximizes power transfer efficiency.

LIGHTWEIGHT WOMEN'S ROAD PERFORMANCE SHOES WITH S-PHYRE DNA. FEATURES - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Integrated seamless midsole and upper construction set a new level of fit, stability and lightweight performance. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Carbon fiber reinforced nylon midsole for power transfer. - Women’s specific last for a natural, comfortable fit. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

STYLISH AND VERSATILE XC SHOES DELIVER HIGH PERFORMANCE TO MORE RIDERS. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Glass fiber reinforced midsole for power transfer. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.

STYLISH AND VERSATILE WOMEN'S XC SHOES DELIVER HIGH PERFORMANCE TO MORE RIDERS. FEATURES - Lightweight SHIMANO ULTREAD XC rubber outsole delivers competition-grade grip that lasts. - Mesh/TPU and Synthetic leather material covered upper in optimized part to provides comfortable fit and light weight. - BOA® L6 dial on instep strap quickly and comfortably secures a wide range of foot shapes. - Glass fiber reinforced midsole for power transfer. - Surround wrapping upper structure reduces overlap and provides a glove-like fit. - Women’s specific last for a natural, comfortable fit. - Rider-tunable spikes allow riders to select and swap spikes to match riding styles and conditions. - Low stack height midsole helps stabilize foot, maximizes power transfer and efficiency.