Cycling Shoes Parts and Accessories

The GT Winter Booties use the same membrane-backed NEOS material as our winterproof jackets, keeping your feet and ankles fully protected in cold winter conditions. For the past several seasons, we’ve been testing our jacket-proven NEOS softshells as worthy bootie textiles, knowing their waterproof, flexible, and breathable properties would also be favorable in a complementing overshoe. NEOS Medium is the primary textile used, as its 3L softshell with PU bonded membrane breathes, blocks wind and water, and adds big doses of insulation to your feet and ankles. The booties feature a reverse camlock zipper, while our zeroCuff creates the smoothest transition possible between your legs and the fabric, furthering the aerodynamic profile.

Aerodynamic rain booties for year-round racing and training, constructed with our ultrathin 2-layer waterproof-breathable Water-Shield textile to protect your feet in the wettest conditions. We took inspiration from our aerodynamic EQUIPE RS Rapidfire Chrono Booties, building an aerodynamic, wind-cheating shoe cover that also happens to be waterproof and highly visible. Made using our 2L waterproof Water-Shield textile, constructed with a superlight, foot-molding membrane that's as protective as it is aerodynamic. The waterproof 2L textile is reversed to expose the slippery silver membrane. The aero cut ensures light compressive support throughout the ankle and lower leg, while our zeroCuff and reversed waterproof camlock zipper round out the streamlined design.

WHEN ANY WEATHER IS GOOD WEATHER Our Rain or Shine collection is designed to perform, and the name implies, in brilliant sunshine or with drizzle or wet roads. With an added Polartec panel on the front and 3-layer fleece-backed waterproof side panels, you'll never miss a day because of your feet again. - Castelli's Rain or Shine label means this product is made to excel in both dry and wet conditions - Polartec Power Stretch Fleece liner provides extra warmth at front - YKK water-resistant zipper - Reflective heel cap with pull tab

Designed to be abused and then re-used, the MT500 Plus Overshoe II uses super tough nylon faced neoprene with durable overlays in high wear areas and a hard-wearing rubber sole that is compatible with wide fit flat pedal and clipless MTB shoes. The front toe section incorporates aggressive, lugged tread to ensure that you don’t lose any of that vital traction needed to push back up the trail. - Super tough, nylon faced neoprene upper with highly durable overlays - Exclusive, hardwearing rubber open sole for flat or clipless pedals - Aggressive rubber toe section for added grip - Rear double Velcro closure with fit adjustment - Wide fit, suitable for varied MTB flat pedal and clipless shoes - Clean shoes, clean lines, muddy trails - Due to the variety of shoe profiles check compatibility with your shoe by trying on before buying

- Stretch waterproof PU fabric with taped center front seam - Extensive 360-degree reflective trim on front, side, and rear - Flatlocked seams for additional durability - Opens fully at sole and up back heel with Velcro fastening for an adjustable fit - Stretch aramid abrasion resistant sole and toe - Suitable for all kinds of footwear and cleats

Rugged Protection For Dirty Days On Your Mountain Bike Endura was among the first to employ neoprene in bike overshoes. A core stalwart of our collection, the MT500 Overshoe has been a best-seller for many years. Here in Scotland, we know a thing or two about foul weather gear, and this latest evolution of our waterproof durable mountain bike overshoe is the result of years of testing in the worst possible conditions. Endura’s unique molded rubber toe cap with a treaded underside provides grip when climbing steep and muddy slopes. The stand-out feature of Endura's MT500 Overshoe, and the one that sets it apart from the rest of the competition, is the molded rubber toe cap. This has been totally revamped with improved tread on the underside that gives you plenty of grip on steep, muddy slopes and also includes additional reinforced areas that improve the durability of the overshoe. Neoprene is the perfect material to construct overshoes from. Not only does it provide water and wind protection but it also adds an insulating layer over your foot. This keeps your circulation going allowing you to ride for longer in comfort, whatever the weather. - Tough nylon-faced neoprene upper - Offset rear zip with snap-down puller and zip guard - Molded rubber toe cap with treaded underside to help climb steep muddy slopes - Asymmetric front seam for improved fit - Hard-wearing reinforced sole protects the bottom of the overshoe from rocks and pedals - Crank-rub protection - Reflective detailing - Suitable for MTB cleats only - 90-day Satisfaction Guarantee

Best-Selling Waterproof Neoprene Overshoe That Insulates And Protects Your Feet From The Rain And Cold—Universally Loved By Roadies Worldwide. Endura was the first to employ neoprene in bike overshoes. Not wanting to rest on our laurels, we have revamped our core road overshoe with several new features to keep it one step ahead of the competition. A core stalwart of our collection, the neoprene Road Overshoe has been a best-seller in our range for many years. Here in Scotland, we know a thing or two about wet weather gear and this waterproof durable overshoe is the result of years of testing in the worst possible conditions. Comfort was a key consideration when updating the Road Overshoe. To improve pedaling comfort, the decision was taken to off-set the rear zip, moving it away from the flex point behind your ankle reducing the chance of it digging in. Smooth neoprene outer face creates a surface that water naturally runs off, keeping your feet warm and dry inside. A durable sole with cleat access points stitched with a bulletproof aramid thread that extends the lifespan of our product beyond more flimsy alternatives on the market. - Smooth neoprene construction and welded asymmetric seam give super-smooth styling and waterproofing - Offset rear zip with snap-down puller and zip guard - Crank-rub protection print - Reflective rear zip tape - Hard-wearing stitching using aramid thread

Replacement 2Density insoles Fits all Giant & Liv non-MES road and mountain shoes - Giant Phase - Liv Mova - Giant Transmit - Giant Phase 2 - Liv Regalo - Giant Flux - Liv Fera

Make sure your gear is working for you during your next aero event. Giant's Aero Shoe Covers help smooth airflow over your feet and reduce drag. Stretchy Lycra covers with sublimated graphics and a back zipper closure make it easy to get these covers over your shoes.

- ProTextura PLUS Wind and water proof material with critical seams taped - ThermTextura functionality due to the properties of neoprene - Medial locking side zipper with Velcro closure - Wear-proof bottom piece - Reflective details for additional visibility

- Windproof and water-repellent ProTextura 4-way stretch fabric for maximum protection and breathability - Zipper closure for easy on and off - Anti-abrasion sole cover - 3D ergonomic fit - 3M Scotchlite reflective details for enhanced visibility in low light

- Three EVA interchangeable levels of support for arch and metatarsal offer complete customization - EVA base material with TPU vibration dampening material in the forefoot area for proper support and cushioning - Co-molded heel support zone is optimized to help stabilize the foot during pedaling - Articulating arch support area is designed for compatibility with ExoWrap technology - TransTextura Plus layer transfers moisture and helps fight bacteria and odors

Our best-selling shoe cover, this piece slips easily over road shoes to add warmth and wind protection for cool weather riding. Our AmFIB toe cover is the perfect answer to cool weather. Its softshell fabric offers terrific protection from wind and rain and is as easy to pull on as a sock. We have increased the stretch to accommodate wider shoes and sizes on the bubble. The opening is sized for any three-bolt cleat. - AmFIB Softshell provides superior wind and water protection. - Simple pull-on design. - BioViz reflective elements for low-light visibility. - For road shoes with external cleats.

This shoe cover is as committed as you are to riding through the wettest weather, thanks to three-layer waterproof/breathable fabric that blocks wind and stops rain in its tracks. The WRX Shoe cover works with both road and mountain bike shoes and can be used with standard footwear as well. (We suggest sizing up for flat pedal and street shoes). A two-stage hook and loop closure makes it easy to pull these on and keeps the elements at bay. BioViz® reflective elements on the toe, side, and heel increase low-light visibility. FEATURES: - Made with recycled materials - Compatible with road, mountain, and standard shoes - We suggest sizing up for mountain bike or street shoes - Three-layer waterproof breathable fabric blocks wind and water - Two-stage hook and loop closures for installation and removal - BioViz® reflective elements increase low-light visibility FABRIC: - 87% polyester, 13% nylon

MTB 4 Hole Cleat Receptacle Plate from Sidi.

MTB Toe Spikes from Sidi.

Caliper Buckle Strap from Sidi.

Fits SP Carbon, Vent Carbon, Eleven Carbon/Composite, Millennium 4, Carbon Composite and Carbon Lite soles. The shape of the heel pad dips in back to go around a rivet in the sole. Fits any SIDI shoes, although one or both nubs on heel pad underside may require trimming with clippers.

Fits all SIDIs with ratchet buckles. Retro fitting on older SIDIs also requires replacing the Caliper Strap.

Soft Instep Closure 2 - Kaos - Genius - Cape - Dominator

SRS Replacement Soles For Dragon 2 & 3 from Sidi.

Replacement tread blocks for 2013 and newer full carbon Drako/Tiger.

Tecno 3 Flex System Tensioner 255 Maxi from Sidi. Original part replacement tensioner for Turbo

Tecno 3 Push Tensioner Original part replacement tensioner for Genius 10, Alba 2, Alba, Dominator 10, Trace 2, Trace.

When warm socks aren't enough, but waterproof shoe covers are too much, our Reflect Overshoe Socks are your ticket to warm toes. They're made from an abrasion-resistant, knitted yarn that not only adds an extra layer of warmth, but ensures you'll be using them for seasons to come. At the top of the overshoe, you'll find a reflective band that helps increase your visibility in low light conditions. - Anti-abrasion knitted yarn was used to provide long-term durability. - Reflective band across the top increases your visibility to motorists in low-light conditions. - Made for riding in transitional weather. - Two-hole cutout on the sole makes it compatible with road shoe cleats and walking pads.

Allows simple, removable, in-shoe adjustment to the forefoot varus/valgus angle for optimum foot, knee, and hip alignment. - Reversible shims work for right or left application - Vented for comfort - Package includes two varus shims (orange) or two valgus shims (yellow), based on selection

IP1-Snap Boa® cartridge assembly for Expert Road and Women's Zante Road shoes. - Includes one cartridge dial assembly and lace. - Left- and Right-specific. - Not for resale, for warranty replacement

L6 Boa assembly for all Specialized L6-equipped shoes.

Your S-Works Road shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works Road shoes. - Fits 2013 and 2014 S-Works Road shoes - Heel lug only - Sold in pairs; includes screws

Your cycling shoes thanklessly accompany you through the toughest intervals in nature's worst conditions. Thank them and keep them ticking along with Specialized's Replacement Heel Lugs. These lugs replace the worn-out tread on your S-Works and Pro model road shoes. - Fits 2012 and earlier S-Works shoes - Fits all Pro Road shoes - Heel lug only - Sold in pairs; includes screws