Bike Bells and Noise Makers

Add a soundtrack (and some fun) to your ride with BellBeats, a handlebar mounted bicycle bell and bluetooth speaker. Never miss a beat Add a soundtrack and a smile to your ride with BellBeats — a digital bike bell and Bluetooth® speaker that easily mounts to your bike's handlebar. Its high-quality Harmon speaker offers clear audio for music, navigation, and alerts. Eight pre-loaded bell sounds range from fun and friendly to urgent to help you communicate the right message to others while you ride. PRODUCT DETAILS - Bluetooth speaker streams music, podcasts, or audio navigation from connected phone - Eight pre-loaded sounds range from friendly to urgent for alerting others - Quality audio optimized by Harmon with up to six hours of music playtime - Alert tones are engineered to be easily located by others for less surpise and more smile - Easily accessible ergonomic controls control both bell and speaker - Digital four-bar LED battery gauge is easily visible - USB-C charge port with IP67 dust and water resistance rating - Includes mount and shims, belt clip, and USB-C charging cable, compatible with bars 25-31.8mm

•Classic Bugle design •Clamp fits most handlebars

Let everyone know your coming with Sunlite's Ding Dong Bell. It makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

•Handlebar mount •Right or left hand use •Fits all bicycles •Alloy ping style bell

Don't let the tiny size fool you. Mirrycle's Incredibell Bellini is little, light and gets noticed! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Weight: Black & Silver 17g, Brass 28g - Dome Diameter: 28mm (1.1") - Fits handlebars with 21mm – 22.6mm (.83" – .89") outside diameters

Mirrycle's Incredibell Brass Duet makes a traditional ding-dong dual-tone ring with the beautiful resonance of solid brass. Plus, its compact size lets you mount it just about anywhere on your handlebars. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

Mirrycle's Candibell is more than just a fun, compact bell, it’s the loudest Incredibell of all. - Dome Diameter: 48mm (1.9") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

The Omnibell has an adjustable band clamp. Its ingeniously designed dinger can be rotated to any position. This gives you flexibility in mounting the bell anywhere on your handlebar, making it very convenient to use either your thumb or another finger to ring the bell. Dome Diameter: 34mm (1.34") Fits handlebars with 22mm – 31.8mm (.87" to 1.25") outside diameters

Mirrycle's Incredibell Spring Bell offers a traditional Asian-style bell that integrates into the top cap of the headset to free up valuable handlebar space. The bell can be mounted any way you choose on the headset, and the dinger is adjustable as well. A flick of your finger and the Spring Bell rings loud and clear for all to hear. - Dome Diameter: 45mm (1.8") - Weight: Black and Silver: 26g (.9oz), Brass: 57g (2oz)

Don't let the small size fool you. Mirrycle's Incredibell Triple is little, light and LOUD! Plus, its diminutive dimensions let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. The Triple fits the 3 most common handlebar sizes: 22.2mm, 25.4mm and 31.8mm. - Dome Diameter: 37mm (1.3")

The louder version of the Original Incredibell. The Incredibell XL is a little bigger and comes with the same pivoting dinger. - Dome Diameter: 43mm (1.7') - Fits handlebars with 21.7mm – 26mm (.85' – 1.03') outside diameters

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 23.8 – 31.8mm handlebars - Weight: 46.5g

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? The Oi Luxe is a bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Oi Luxe is luxe in every sense of the word. Its CNC machined ringer and brass dinger, stitched 'vegan' leather shim, and metal injection molded stainless steel make it a pleasure to have on your handlebars. - Fits 22.2mm handlebars - Weight: 31.5g

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available - Mounts with steel strap and features lever strike operation - Fits bars 22.2mm to 31.8mm - Made in Japan

Timeless designs with a loud, clear tone, undoubtedly some of the finest bells available. - Spring-loaded lever arm strike mechanism - Standard domes are 55mm wide and Mini domes are 45mm - Steel band clamps fits bars 22.2 to 26.0mm - Made in Japan

"Ding, ding, ding! Passing on your left." The timeless design and clear tone of the Courtesy Bell Classic is a fun way to be a better bike path citizen. Its elegant all metal construction and sophisticated good looks will get you noticed.

Announce your presence with Portland Design Works' Alexander Graham Bell. Built to replace a 10mm 1 1/8 headset spacer, this bell is a classy addition to your rig without sacrificing any of your precious handlebar real estate. - Polished brass bell  - Replaces a 10mm 1 1/8" headset spacer - Quick-reflex alloy clapper - Lifetime PDWarranty

Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars

Announce your presence with Portland Design Works' King Of Ding II Bell. This solid brass bell rings loud and clear. - Solid brass bell - Brass striker - Alloy mounting - Fits 22.2 - 25.4mm handlebars

Classically designed bicycle bell featuring modern materials and a robust machined-aluminum handlebar mount. The bell dome and striker are crafted from high-quality brass with a sturdy stainless steel spring. Its secure base quickly mounts to most modern bicycle handlebars (25.4mm or 22.2mm diameter) with a stainless steel Torx bolt. And its narrow design attaches neatly between other handlebar accessories. It provides a powerful ring that’s excellent for all cyclists and commuters alike. This bell is engineered to be extremely durable with excellent resistance to weather-related wear-and-tear. This lightweight and stylish ringer is the ultimate bicycle bell. - Compact, classic bell-shape construction for a high-quality sound - Bell and striker are made from high-polished brass - CNC-machined aluminum hard handlebar mount, designed for 25.4 - 22.2mm tube - Molded rubber shims add grip and fine tune fitting - Stainless steel hammer - Impressively loud ring - Weight: 34g

- 115 decibel horn with volume control switch - Mounts to most handlebars - Air reservoir is easily refilled with any bike pump - no batteries needed - Extension allows for more versatility when mounting

Low profile and brilliant bass dome. Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic brass sound - Low-profile design with brilliant brass dome - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - easily mounts to any bar from 22.2 - 36.2 mm - Brass dome with adjustable rubber strap - Weight: 0.08 lb / 34g