Bottom Brackets

$18.99 - $24.99
- Made to fit crank spindles and press-fit Mid BB frames.
- Simple and easy to install.
- Includes an assortment of spacers to optimize chainline and crank clearance.
- Odyssey 6061-T6 aluminum dust spacer included.

$60.00
TruVativ's Howitzer Team Bottom Bracket is THE workhorse built for abuse. Sealed, oversize cartridge bearings are used to provide smooth action and extreme durability. For serious downhill-worthy strength, the Howitzer boasts CNC-machined aluminum cups and a chromoly spindle, too.

$150.00
• Fits BB92, BB89.5 and BB86.5 frames
• Easily serviced, replaceable sealed bearings and external labyrinth seal
• Cups pressed in and held in place by a screw in centre tube stopping any movement or play usually found in press-fit frames
• Compatible with any 24mm axle cranks
• Requires Hope PressFit BB tool for installation (sold separately)
• Available with either stainless steel or ceramic bearings

$31.99
- Steel body
- Chromoly spindle
- Sealed bearings
- Repair BB designed to work in frames that have stripped BB threads
- Shell: 68mm
- Spindle Type: Square Taper JIS
- Weight: 360-370 grams

$30.99
- Forged steel body
- Alloy cups
- Chromoly spindle
- Sealed bearings
- Interface: English
- Spindle Type: Square Taper JIS
- Weight: 290-300 grams

$245.00
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.
- Easy installation
- PressFit cups for lighter weight
- Narrow Q-factor and more ankle clearance
- Integrated gutter seal to prolong life
- Integrated adjuster
- 30mm spindle diameter
For installing any crankset with a BB30 spindle into any BB30 frame or frame with 46mm I.D. press fit diameter bottom bracket shell
- BB Shell Width (mm): 68 mm, 73 mm, 79 mm, 86 mm, 92 mm
- BB/Frame Interface: 386 EVO, BBright Press Fit, PF30, 392 EVO
- Bottom Bracket Shell I.D.: 46
- Spindle Interface Type: e*Thirteen P3 Connect, 392 EVO, 386 EVO, Campagnolo Over-Torque, Hope BSA30, RaceFace/Easton CINCH, Rotor 3D+

$71.99
Origin8's BB386 Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Its hybrid AL6061/Nylon fiber cups offer a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable.
- Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into BB386 frames without the need for adapters
- Shell: 86.5mm x 46mm
- Interface: BB386
- Cup Material: AL6061/Nylon Fiber
- Weight: 135g

$38.00
Get the most out of SRAM's high-tech cranksets with the GXP XR Bottom Bracket. Built to last, this super-smooth bottom bracket lets your SRAM GXP crankset (sold separately) spin effortlessly without weighing you down. This GXP bottom bracket matches SRAM's tandem cranks.
- Spindle Interface Type: TruVativ GXP

$54.99
- Extra-thick walled hollow CrMo spindle with Ti-Nitride coating
- Industrial cartridge bearings. 12mm steel crank bolts included
- Forged aluminum cups with lip on drive side.
- 280g

$9.99
- Fits 3-piece crank set
- Includes right and left cup, lockring and bearings
- English type
- Shell: 68/73mm
- Cup Material: Steel
- Weight: 123 grams

$24.99
Running a conventional threaded bottom bracket on your BB30 or PF30 frame doesn't have to be complicated. This press-fit adapter from FSA goes in snug and opens up a lot of crankset possibilities for your BB30/PF30 frame.
- Aluminum
- Allows conventional threaded bottom brackets to be installed in a BB30 or PF30 frame
- Install with headset press (not included) and green Loctite (included)

$35.99
This FSA Bottom Bracket allows you to run MegaExo and other 24mm spindle cranksets with a BB86/BB89.5/BB92 frame.
- Intended for road use
- Steel bearings

$49.99
SRAM saw the opportunity to make a better press fit system where all the best from BB30 and PressFit bottom brackets would be combined into one captivating package. Pressfit 30 will feature an integrated seal, pre-assembled into the cups, to further prolong bearing life. The key difference with Pressfit 30 is how the bearings are fitted into the frame. Bearings are housed in nylon cups which will be pressed into the frames bottom bracket shell. This bottom bracket is designed for 30mm spindle cranksets.
Frames will need a 46mm inner-diameter bottom bracket shell to accommodate this system. Pressfit 30 for road will require a 68mm wide shell while Pressfit 30 for MTB will require a 73mm wide shell.
- Easy installation
- PressFit cups for lighter weight
- Narrow Q-factor and more ankle clearance
- Integrated gutter seal to prolong life
- Integrated adjuster
- 30mm spindle diameter

$44.99
SRAM's GXP Team PressFit MTB Bottom Bracket Cups are the premium choice for getting the most out of every pedal stroke. They feature smooth bearings that keep drag to a minimum and seals that keep debris out. Plus, these BB cups press directly into the frame without having to be threaded in for reduced weight and enhanced durability.

$38.00 - $50.00
The SRAM DUB bottom bracket series has a simple job— to connect crankarms and protect the smooth, long-lasting application of power to the drivetrain. SRAM engineered the oversized DUB spindle to work across every bottom bracket standard, simplifying crankarm compatibility.
- Gutter Seal Technology drastically improves sealing against the elements
- Sealed cartridge bearings
- One oversized spindle to work across every bottom bracket standard
- Significantly lighter than GXP system

$70.00
Surly OD Bottom Brackets
- PF cups are 41mm in diameter
- Bearing I.D. is 24mm
- OD bottom bracket comes with telescoping center sleeve for added durability
- High quality double labyrinth sealed stainless Enduro bearings with corrosion resistant coating
- 3 additional 1mm spacers are provided to help with chain line and crank arm clearance

$70.00 - $130.00
Surly OD Bottom Brackets
- Compatible with 24mm spindles
- Moonlander BB fits a 100mm bottom bracket shell, but exterior width conforms to BB121 standard

$59.00
Downhillers and freeriders need tough gear that can handle the abuse of big air and huge drops. TruVativ's Giga Pipe Team DH Bottom Bracket uses four sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$39.99
Shimano BB-ES51 Octalink V2 Bottom Brackets
- Fits Shimano Octalink V2 Spline Cranksets
- Crankarm fixing bolts not included

$25.99 - $29.99
• Lightweight seal structure removes grams
• Durable anodized finish
• Includes left and right hand cups, spacers, inner cover, and inner o-rings
• Easy installation with TL-FC25 tool
• Compatible with 24mm crank spindles
• English, threaded: 68/73mm bottom bracket
• Pressfit: BB86/92 bottom brackets

$51.99
Origin8's Revolvr BB386 Outboard Bottom Bracket features forged and CNC-machined AL6061 thread-in cups for a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable.
- Designed for installing BB30 Wide or BB386 30mm spindle cranks into BSA threaded frames
- For use with 30mm diameter cranks with a spindle length of at least 104mm
- Shell: 68mm x 33.6-33.9mm
- Interface: ISO/English or BSA Threaded (1.37" x 24TPI)
- Spindle Type: BB30 Wide/BB386 30mm
- Cup Material: AL6061
- Weight: 120g

$71.99 - $79.99
Origin8's Revolvr PF30 Outboard Thread-Together Bottom Bracket provides a secure and stable shell interface for smoother operation and extended bearing life. Hybrid AL6061/Nylon fiber cups provide a superior fit and noise-free operation. Low-friction dual seals protect the bearings from harmful contaminants, while sealed premium bearings are both serviceable and replaceable.
- Designed for installing Shimano HollowTechII 24mm or SRAM GXP 22/24mm spindle cranks into PF30 frames without the need for adapters
- Shell: 68-73mm x 46mm
- Interface: PF30
- Cup Material: AL6061/Nylon Fiber
- Weight: 138g

$13.99
- Steel body
- Steel cups
- Chromoly spindle
- Sealed bearings
- Interface: English
- Square Taper JIS
- Weight: 305-320 grams

$41.99
Origin-8's ISIS Bottom Bracket is everything you need to get your wheels rolling. It features a steel body and hollow-chromoly spindle that adds stiffness and cuts down on weight. The sealed bearings are super smooth and durable, and this fine BB is available in 3 sizes with a 68mm shell.

$175.00
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ZERØ Ceramic - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: HollowTech II (Shimano, FSA, Etc.) - Crank Spindle Diameter: 24mm - Weight: 95g

$90.00
Specifically designed for installing 22/24mm spindle diameter cranks (SRAM) in Cannondale PF30A (46mm ID, 73mm wide asymmetrical BB shell) frames without the need for any adapters. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: Cannondale PF30A - Bottom Bracket Shell Width: 73mm - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 91mm in 73mm wide shell (dimensions include supplied silicone dust shields) - Tool Pattern: 44mm x 16 notch

$85.00
PF30 Threaded Angular Contact BB for Fat Bike. Fits Specialized Fatboy frames, and any other brand frames with PF30 x 100mm bottom bracket shell. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30 - Bottom Bracket Shell Width (mm): 100mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: BB30 - Crank Spindle Diameter: 30mm - Weight: 130g
Page 1 of 6
Next page