Adult Bicycle Helmets

LIGHTER, COOLER, SLEEKER, PLUS ALL THE ADDED PROTECTION OF SPHERICAL TECHNOLOGY POWERED BY MIPS® AND OUR NEW DRYCORE™ SWEAT MANAGEMENT SYSTEM: THE ARIES SPHERICAL IS LIKE NOTHING BEFORE. STRUCTURAL INTEGRITY The proprietary AURA II Reinforcement Arch makes everything possible. These shatter-resistant, translucent twin bridges run throughout the helmet, providing structural integrity without adding unnecessary weight. Aries’ ultra-low weight (~5% lighter than Aether), impressive cooling power and sleek, compact shape would not be possible without AURA II. SPHERICAL TECHNOLOGY This unique ball-and-socket design, powered by Mips®, helps redirect impact forces. Spherical Technology also boasts more comfort, improved airflow, and Progressive Layering (which mates two densities of EPS foam to address a wide range of impact energy). The results are clear: independent authority Virginia Tech has rated Aries #1 in reducing the risk of injury. It’s the best performing helmet they’ve tested so far – even out-performing much bigger, bulkier helmets at reducing risk. COOL COMFORT Deep internal channels connect with Aries’ massive front and rear vents. This system provides a path for cool air to flow over the rider’s scalp and exit the rear, taking excess heat with it. Aries outperforms our previous cooling benchmark, the Aether, with a 2.3% improvement in cooling efficiency. STREAMLINED SPEED When it comes to going fast, smaller truly is better. To craft Aries, we focused on reducing the frontal surface area to eliminate more drag. Add in tiny details like chamfered edges on the AURA II, and meticulously engineered internal channeling that actually speeds up the air as it exits the helmet, and Aries emerges as the climbing helmet that doesn’t sacrifice speed, reducing aerodynamic drag by 4% over Aether Spherical. Aries also debuts our revolutionary DryCore™ sweat management system. A soft, silicone bead is hidden within the plush brow pad that redirects sweat away from the forehead and to the temples, where it can evaporate more easily. LIKE NOTHING A helmet that feels like it isn't there: the all-new Aries™ Spherical is like nothing before. Its sleeker form and lighter weight (only 270 grams in size medium, CE certification), deliver sensational comfort and cooling power. Spherical Technology™, our ball-and-socket design powered by Mips®, adds protection by redirecting energy away from the brain in certain impacts, and Progressive Layering with dual densities of Nanobead EPS foam adds more comprehensive energy management. 24 Wind Tunnel vents are maximized by the AURA II Reinforcement Arch, while a plush DryCore™ brow pad manages sweat and combines with a network of intricately engineered deep internal channeling to elevate comfort. From the proven reliability and adjustability of the Roc Loc® 5+ Air fit system, to full lower hardbody coverage to enhance durability, to the meticulous production quality, the Aries is state-of-the-art performance, protection, and style. SPECS: CONSTRUCTION: - IN-MOLD CONSTRUCTION - NANOBEAD EPS FOAM - FULL LOWER HARDBODY COVERAGE VENTILATION: - 24 VENTS AND DEEP INTERNAL CHANNELING FIT SYSTEM: - ROC LOC 5+ AIR PRODUCT WEIGHT: - 275G (SIZE MEDIUM CPSC) CERTIFICATION: - COMPLIES WITH THE US CPSC SAFETY STANDARD FOR BICYCLE HELMET FOR PERSONS AGE 5 AND OLDER HIGHLIGHTS: - AURA II REINFORCEMENT ARCH - IONIC+™ ANTI-MICROBIAL PADDING - DRYCORE™ SWEAT MANAGEMENT SYSTEM - EYEWEAR DOCKING PORTS

The Caden MIPS II offers a sophisticated style with advanced head protection technology, making it a perfect match for your on-the-go lifestyle. A sleek In-Mold shell helps keep Caden lightweight, and the Roc Loc City MIPS fit system makes fit and feel adjustments almost effortless. Inside the helmet, MIPS technology can help to reduce rotational forces to provide more protection in certain impacts. Thoughtful details include reflective accents, a lock port for securing the helmet with your bike or a bag when you're on the move, and a TPU cycling cap-style visor that accents your style without compromising ventilation.

An off-road helmet with WaveCel technology that balances comfort and performance for trail riders who value safety. - WaveCel advanced helmet technology - Virginia Tech 5 STAR safety rating - BOA® Fit system lets you easily secure and adjust your helmet with one hand - Adjustable visor offers multiple coverage options - LockDown dividers make helmet strap management clean and easy to adjust - Soft, comfortable, and moisture-wicking washable helmet pads

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

The Caden MIPS offers a sophisticated style with advanced head protection technology, making it a perfect match for your on-the-go lifestyle. The light, yet tough In-Mold shell helps to resist dents and dings from life on the streets, and the Roc Loc City MIPS fit system makes fit/feel adjustment almost effortless. Inside the helmet, MIPS technology can help to reduce rotational forces to provide more protection in certain impacts. Thoughtful details include reflective accents, a lock port for securing the helmet with your bike or a bag when you’re on the move, and a removable cycling cap-style visor that accents your style without compromising ventilation.

A lightweight in-mold design with built-in front and rear LED lights and remote handlebar-activated turn signals is the perfect accessory for the daily commute through the urban jungle. STANDOUT STYLE WITH BOLD VISIBILITY Choose to ride, choose to be seen. The Ethos™ Mips® is a revolution in transportation, with a compact and stylish form featuring the added protection of Mips® Brain Protection System highlighted by integrated LED front white lights, rear red lights, and amber turn signals, all controlled via an intuitive handlebar remote. The entire system is USB-C rechargeable with an estimated run time of 10 hours in low-blink mode and 5 hours in the high-blink mode, which delivers 45 lumens front and 30 lumens rear. Helmet and remote can be fully charged in just 2 hours and 1 hour, respectively. The Ethos Mips features a TPU soft rubber waterproof brim. (The Ethos Mips also is available with a clear, molded eye shield as the Ethos Mips Shield). Despite the added technology, in-mold construction keeps the weight manageable, full hardbody coverage adds durability, and a Roc Loc® City Mips fit system plus quick-dry padding ensure comfort. Whether you're a dedicated bike commuter, running the kids to school on your e-cargo bike, or simply looking for added visibility as you ride around town, the Ethos Mips is a look into the future. Highlights: - Built-in front (white) and rear (red) LEDs - Handlebar-activated turn signals (amber/yellow) - Micro-USB C rechargeable - Deep coverage - Quick-dry padding

Whether you're taking a leisure weekend ride around the city or setting out for a new personal best on Strava, the Strada KinetiCore offers extensive protection for all levels of cyclists so you can focus on the best part: getting the absolute most out of every ride. Pedal with peace of mind and leave the protection up to us. Better by design, KinetiCore is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built right into the helmet instead of added on after. Featuring highly breathable ventilation channels, a silicone docking system to conveniently stash your eyewear, and Aeroshell compatibility for increased aerodynamic performance and protection in every kind of weather, the Strada KinetiCore delivers high-value performance in a light and comfortable package. The ScrollSys belt adjusts for a quick and secure fit with minimal fiddling, and LED light compatibility at the rear of the helmet ensures maximum visibility for those rides that start or end in the dark. This helmet scores a "Best Available" 5-star protection rating from Virginia Tech. - WEIGHT: 290g (size medium) - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: ScrollSys - VENTILATION: 21 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Aeroshell, Optional Universal LED Features: Aeroshell Compatible For increased aerodynamic performance and protection from the elements, this helmet can be upgraded with the Lazer Aeroshell. Eyewear Docking Silicone Keep your eyewear secure and out of your line of vision when not in use by tucking it into the vent docking system. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED at the back of the helmet and stay seen no matter what the light or weather conditions are. Precise Fit Refine your perfect fit with the easy-to-use ScrollSys belt for quick adjustment on the go. The floating front headband increases airflow and eliminates pressure points, so you can focus more on your ride and less on adjusting your gear. Advanced Ventilation Keep cool with Lazer's Venturi ventilation channels, which draw the breeze in and expel hot air out through the rear of the helmet to help keep you from overheating. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Lightweight Design Built 6% lighter than the Lazer Blade+ MIPS helmet and with 20g less plastic, its reduced carbon footprint design provides top-rated protection without unnecessary weight.

Weighing in at 235 grams, the G1 MIPS is the lightest helmet we have ever made. It is the climbers’ favorite on the ProTour. Not only is it a featherweight, but it’s extremely well ventilated. Twenty-two vents and internal air channels create 8% more airflow over the head than wearing no helmet at all. It’s also comfortable—vital for long days in the saddle. The Super Lightweight ARS Fit System ensures a snug and comfortable fit with no pressure points. The head basket is adjustable. Two sets of pads are included so you can choose between superlight and comfort pads. Awarded the esteemed Virginia Tech 5-Star “Best Available” protection rating, you can trust that the G1 MIPS is a great choice. The MIPS system helps reduce the risk of rotational injury. When you’re after every bit of speed, the addition of the Aeroshell (sold separately) transforms the G1 MIPS into an aero helmet. - Lightweight - Well ventilated (22 vents) - Advanced Rollsys system - Comes with race and comfort pads - Lazer Aeroshell compatible (sold separately) - UCI World Tour helmet - MIPS layer - Construction: In-Mold, EPS foam, polycarbonate, nylon - Weight: 235g - Certification: CPSC

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs' MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS system and an industry-first dual-density EPP + EPS liner that protects against both high- and low-speed impacts; this is a helmet that doesn't take your safety lightly. Add in an adjustable strap and X-Static Pure Silver comfort liner, and the comfort is every bit on par with the protection. Specifications - Huge air intakes - 25% larger than A1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency - MIPS brain protection system reduces rotational forces to the brain in some crash scenarios - Dual-density EPS co-molded with EPP for state-of-the-art impact energy management at low- and high-crash speeds, as well as everything in between - Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit - Adjustable strap dividers for a perfect fit every time - 350 grams (size M/L) - CPSC 1203, CE EN 1078, AS NZ 2063:2008

Deeper coverage, superior venting, and a super-lightweight design work together to make the Metah all mountain helmet the perfect helmet for all day protection on any trail. - Fox all mountain helmet with lower coverage on back of head for added protection - 10 Big Bore vents provide improved airflow and reduced weight - Fox Varizorb multi-density impact reduction system provides superior protection - Fixed anchor Y-Strap system offers simple on and off and improved fit - Premium liner with sealed edges for increased comfort and moisture management - Single hand dial actuated retention system provides easy adjustment

Fox based the Rampage Pro Carbon Helmet on their legendary motocross lids. And you better believe it delivers full protection and confidence everywhere on the track. This EN-, CPSC-, and ASTM-approved helmet boasts an anatomical EPS foam inner shell with a removable, washable Dri-Lex liner and 3D-molded cheek pads that make the Rampage Pro as comfortable as it is technical. Impressive cooling comes from 17 vents and innovative, multi-panel pad vents that pull the air in and blast it back out. And thanks to its carbon construction, this full-on DH-worthy helmet won't weigh you down when you're pinning it. And, since there is no such thing as a perfect crash, the MIPS feature adds an extra level of protection.

Inspired by gravity riders and presenting a modern mountain biking style, this off-road helmet is designed with generous ventilation and added protection Along with essential safety features like MIPS technology, we’ve added a lower rear coverage design to shield more of the back of your head. Direct Flow Cooling channels are designed to pull in air to keep you cool during slow, challenging climbs or flowy descents. With a one-handed dial adjustment and rear fit system you get perfect head-hugging comfort. - Simple, clean and compact helmet shape - Optimized vent design for enhanced breathability - MIPS brain protection system and lower rear coverage - New 360° full surround fit-belt - Intuitive one-handed dial adjustment (Cinch ONE fit system) - Compatible with Alumbra taillight: Liv proprietary taillight docking station - In-molded construction for added strength - TransTextura moisture-wicking, anti-odor inner padding - Pony-tail friendly rear fit system space - Detachable visor - S / M (49-57cm), M / L (53-61 cm)

At just 850 grams, the Sanction is our low-profile full-face helmet aimed at dirt shredders and BMX riders who don’t need the more robust Full-9 or Transfer-9. The Sanction has become the choice of adults who want full-face protection but prefer a smaller size and profile. If you’re riding a chairlift, go with a Full-9 or Transfer-9. But if you’re pedaling BMX or dirt jumps, this helmet will serve you well.

The Nutcase Street Helmet collection combines the industry leading safety feature MIPS with original Nutcase inspiring designs. Featuring an improved retention system to provide a secure, comfortable fit and 2x the reflectivity for visibility on the road. 11 air vents increase the airflow to keep your brain cool and creative designs to keep you looking even cooler. - Equipped with MIPS (Multi-directional Impact Protection System) designed to reduce rotational forces that can result from certain impacts - High performing injection molded ABS shell and tuned EPS foam to keep you safe on the road - Improved ventilation to keep you cool - Premium Fidlock magnetic closure for one handed snap and go buckle - 3 piece internal heat sealed pads to provide next to brain comfort - Simple dial adjustable fit system provides safety, individualized fit and comfort - 2x reflectivity for increased visibility on the road - Eleven vents with internal channels in EPS for ventilation - Visor Included - CPSC 16 CFR 1203 and ASTM F1492 certified for cycling, scooting, and skating

Our Full-Coverage Open-Face MTB Helmet Redefining open-face helmets, the Dropframe Pro has earned Virginia Tech's best rating (5 STARS) in their Bicycle Helmet Ratings program with the best rating of any helmet they have ever tested. Super-light and extremely comfortable, it's the choice for trail riders seeking more coverage, more confidence, and more fun. This game-changing open-faced enduro helmet features MIPS, our dual-density Varizorb EPS liner, and increased coverage for the ears, jaw, and back of the head. This MTB helmet provides the most complete coverage we offer in an open-face helmet. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Dual-density Varizorb EPS liner is meant to provide improved impact protection - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - Removable antimicrobial and moisture-wicking liner - Includes additional pads for a custom fit - Small = 52 – 54cm - Medium = 54 – 56cm - Large = 56 – 58cm - X-Large = 58 – 60cm Certifications - CPSC - EN 1078 - AS/NZS 2063

Engineered for speed and elevated performance. At 29% lighter, 2.3% more aerodynamic, and providing 5.4% better cooling and ventilation than its predecessor Lazer Bullet 2.0, the Vento KinetiCore packs superior comfort and performance-driven features for those seeking more than just marginal gains. KinetiCore by Lazer is the world's first responsibly designed and fully Integrated Rotational Impact Protection technology that's built better by design. Integrated right into the helmet instead of added on after, KinetiCore delivers next-level protection in addition to weight reduction and increased ventilation. The highly breathable Vento KinetiCore is designed in sprint position at a 15-degree angle to maximize aerodynamic performance and features an advanced ventilation system to facilitate cooling — pushing you to go further with a helmet that works as hard as you do. The easy fit ScrollSys belt tailors the helmet to your head in seconds, while the convenient silicone docking system keeps eyewear secure when not in use. Compatibility with the Universal Lazer LED light ensures you're visible under any light or weather conditions. This helmet scores an esteemed "Best Available" 5-star protection rating from Virginia Tech. - WEIGHT: 290g (size medium) - MATERIAL: EPS Foam, Polycarbonate, Nylon - FIT SYSTEM: ScrollSys - VENTILATION: 13 - ROTATIONAL PROTECTION: Lazer KinetiCore - CERTIFICATION: CPSC - ACCESSORIES: Optional Universal LED Features: Built for Speed Designed in sprint position at a 15-degree angle with a reduced frontal surface for superior aerodynamic performance. Eyewear Docking Silicone Keep your eyewear secure and out of your line of vision when not in use by tucking it into the vent docking system. Integrated Rotational Impact Protection KinetiCore Controlled Crumple Zones absorb the force of both direct and rotational impacts in the event of a crash to re-direct energy away from your head, protecting you when you need it most. LED Light Compatible Increase visibility by attaching the Universal Lazer LED at the back of the helmet and stay seen no matter what the light or weather conditions are. Precise Fit Refine your perfect fit with the easy to use ScrollSys belt for quick adjustment on the fly. The floating front headband increases airflow and eliminates pressure points, so you can focus on the ride ahead, not on adjusting your gear. Work Hard, Stay Cool Venturi advanced ventilation system draws cool air in and expels hot air through the rear of the helmet to help cool you down when you're breaking a sweat. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet. Lightweight Design Built 29% lighter and with 90g less plastic than the Lazer Bullet 2.0 MIPS, its streamlined design is built more sustainably with a reduced carbon footprint while sparing no expense in performance.

Breathable full-face mountain bike helmet. Conquer the mountain with this full-face protection specialist. The Proframe Helmet is the original full-face trail helmet and is still the market leader. Designed to meet the needs of all-mountain riders and enduro racers, it packs Mips® technology into a superlight shell. Key Features and Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - 3-position adjustable visor compatible with goggles - Removable under visor GoPro mount included - Increased ventilation and decreased surface contact area improve cooling - Includes additional pad set to optimize fit Meets the ASTM-F1952 Downhill MTB certification standard Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel Materials: 22% ABS, 21% EPS, 15% polycarbonate, 13% polyurethane, 9% Pa

Key Features: - Mips® equipped - BOA® Fit System to fine-tune your fit - FIDLOCK® SNAP magnetic buckle for quick and secure operation - Integrated sunglasses holder Versatile, lightweight trail helmet The all-new Crossframe Pro Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are. Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and - redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK® SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Strap divider adjustment for repositioning the angle of the chinstrap - Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® Fit System with micro-adjustability allows you to fine-tune your fit on the fly - Rear cradle adjustment for setting the BOA dial to an ideal position - TPU vent inserts to keep your sunglasses securely stored when not in use

Key Features: - Mips® equipped - BOA® Fit System to fine-tune your fit - FIDLOCK® SNAP magnetic buckle for quick and secure operation - Integrated sunglasses holder Versatile, lightweight trail helmet The all-new Crossframe Pro Helmet is bred for elevated heart rates, ?at-out sprints, and everything in between. Lightweight, versatile, and crafted with Mips® and BOA®, this helmet is ready for any trail that you are. Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and - redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK® SNAP helmet buckle provides quick and secure entry and exit, even while wearing gloves - Strap divider adjustment for repositioning the angle of the chinstrap - Removable, washable Ionic+® liner is anti-microbial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - BOA® Fit System with micro-adjustability allows you to fine-tune your fit on the fly - Rear cradle adjustment for setting the BOA dial to an ideal position - TPU vent inserts to keep your sunglasses securely stored when not in use

Ready for the trail. Designed for the fast descents and long technical climbs. This is the perfect helmet for committed trail riders and those wanting to explore beyond the beaten path. Where it thrives: Challenging trails, out in the elements What it's built for: Durability, comfort Highlights: - 13 air vents - Deep rear coverage - Adjustable angle visor

The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The Syntax Mips® combines a touch of European flair with slightly deeper coverage and high-performance features — all tucked into a very slim design. The fit is luxurious and secure, thanks to our highly adjustable Roc Loc™ 5 Air Mips system that allows you to customize fit and feel for great stability and long-range comfort while providing an added measure of protection from rotational forces in the event of an angled impact. The outer shell is molded from a tough polycarbonate that's fused permanently to the EPS foam liner using our In-Mold construction process to enhance durability and ventilation without excess bulk. FEATURES - HARDSHELL WITH IN-MOLD HARDBODY™ LOWER WRAP — The two-piece shell combines a tough outer hard shell with a polycarbonate lower shell permanently fused to the liner for durability without excess weight. - INTEGRATED MIPS® BRAIN PROTECTION SYSTEM — All Giro helmets are designed to reduce as much energy as possible while meeting and exceeding stringent safety standards. The goal of Giro's Integrated Mips-equipped helmets is to reduce rotational forces. Giro believes that helmets equipped with this technology can reduce the amount of rotational force that may be transferred to rider's brain in certain impacts. - ROC LOC 5 AIR MIPS FIT SYSTEM — This revolutionary fit system adds a new dimension to helmet performance by enhancing cooling, as well as fit comfort and stability. Using a patented design that suspends the helmet just slightly off the top of the skull, Roc Loc 5 Air Mips allows cool airflow to pass directly over your head, further enhancing the performance of vents and internal channeling that exhaust heat out of the helmet. Fit and feel adjustments mimic the Roc Loc 5 Mips, allowing you to easily custom tune fit tension and fore-aft tilt of the helmet in seconds using a single hand. - WIND TUNNEL VENTILATION — Giro helmets are developed utilizing our proprietary Wind Tunnel™ ventilation system. This elaborate design combines active vents in the helmet's shell with exhaust channels inside the helmet that thrust fresh, cool air over and around the rider's head while forcing heat and stale air out. It's the most effective cooling system available, and a difference you can feel every time you ride. - IONIC+® PADDING — Pure Silver is the secret ingredient that gives IONIC+® the power to provide natural, permanent odor protection to keep your helmet feeling fresh. HIGHLIGHTS - Ionic+™ anti-microbial padding - Featherweight webbing with Slimline™ Buckle Complies with the US CPSC Safety Standard for Bicycle Helmet for Persons Age 5 and Older E.U.: CE EN1078

Speedframe Pro Helmet Lunar from Fox Racing.

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Average weight: 640 grams (medium). - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synced. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Tune a more precise, personalized fit thanks to Gambit’s adjustable Integrated Fit System that accommodates variations in head shape and occipital base.

The Nutcase VIO MIPS LED helmet was designed for both urban and adventure riders alike. Featuring safety leading MIPS technology and 360° LED lighting (200 lumen front/65 lumen side & rear), lighting up the night has never been so much fun. The VIO delivers all this with a 3 hour run time. Features: - 3 oversized vents for maximum airflow - 360° reflectivity - Fidlock® magnetic buckle - Xstatic® anti-microbial pads - adjustable spin dial for a premium fit - removable visor. - Sizes: S/M (55- 59cm) and L/XL (59- 62cm) VIO brings ground-breaking light and panoramic visibility to the urban jungle and wanderlust gravel backroads with an industry leading 360° LED light system. Featuring an innovative headbadge that doubles as a headlamp that produces 200 LED lumens of headlight and a 65 LED lumen side and rear red and orange light band, the VIO can be be seen from over 500 feet away meeting most state guidelines as a bicycle light. Literally at it’s core, the Vio boasts an exclusive and patented Exo-skeleton technology, making the VIO the lightest 360° LED helmet in the world. Vio boasts a two piece in-mold construction with Duo Density EPS foam. A denser outer layer of foam shields against initial impacts and a softer inner layer cushions the brain after initial impact, providing the ultimate in protection.

So comfortable you won't ever want to take it off. The A3 mountain bike helmet is a new standard in premium mountain bike helmets with luxurious comfort, patent-pending innovations in safety, ventilation that will you keep you cool on the longest climbs with comfort and coverage to protect on the sketchiest of descents. Highest possible score (5-STAR) from Virginia Tech helmet safety lab so you can feel confident in all conditions. - Co-molded EPP and EPS for low and high-speed Patent Pending impact energy management. - B-Series MIPS Rotational Brain Protection system creates an optimal 360 degree fit that can maximize the safety features built into the A3. - Advanced layering 3-piece shell. - 3-Way Magnajust® visor easily accommodates goggles whether they are stowed on the upswing or on your face. - TLD Sweat Glide System – EVA wicking foam behind the comfort liner along the front brow directs sweat away from the eyes and optics. Includes 2 spares. - 2-piece Ionic® comfort liner for anti-microbial & sweat wicking properties that is also quick to dry. - 16 vents optimally tuned with the channeling of the helmet to create the most intake and exhaust of any half shell helmet TLD has produced. - Premium 3d Fidlock® magnetic buckle system and composite smart shear screws are made to shear away during severe impact/direct hit to visor. - Includes helmet carrying bag, (2) spare sweat glide strips and a spare Ionic® comfort liner and sticker kit. - Certification - CPSC 1203, CE EN 1078, AS NZ 2063:2008

Built with an aerospace shell design and materials, TLD was able to get the D4 Composite helmet to 1050 grams without sacrificing any strength. MIPS C2 protection system is used to add an additional layer of safety in the event of a fall. For comfort, the D4 Comp routes cooling air through a front air intake system that flows through the polymer center and power grid side mesh keeping your head cooler during the ride. X-static® and XT2® anti-microbial/anti-odor padding keep the inside of the helmet a much nicer place to be. D4 COMPOSITE FEATURES: 20 high-flow intake and exhaust ports for maximum ventilation Added eps and new headform shape for improved impact performance Full incremental sizing for greater range of fitment Strategically placed interior chinbar shock pads for comfort and durability Quick-release and contoured 3D cheek pads for emergency helmet removal Purpose-built internal cavities for audio integration Stainless steel chinstrap D-rings are light and strong Includes TLD drawstring helmet sock Exceeds bicycle certifications: CPSC 1203, CE EN 1078:2002+A1:2012 ASTM F1952-15, ASTM F2032-15, ASTM F2040-11 Not intended for use with motorized vehicles

Fit, Protection, Style After years of research and development, the Troy Lee Designs Team is proud to introduce our latest creation - the A1 helmet. Here at TLD, styling, graphics, fit, function, and safety are key in everything we create. This lightweight, fully encapsulated all-mountain helmet utilizes maximum coverage and dimension to keep you safe and protected in all riding conditions. Whether you're charging single track, riding dirt jumps, or grinding out miles on the XC bike, the A1 helmet offers the premium fit, protection, and style you want. - Reinforced polycarbonate shell in-molded with EPS liner extends down the sides and back of the head for maximum protection and durability - MIPS brain protection system reduces rotational forces to the brain - 8 pressurized intake passages draw in cool air for maximum ventilation - 8 rear vacuum vortex outlets help exhaust helmet and draw heat from head - Triple position adjustable retention system allows customized fit for various eyewear, head shape, and riding styles - Single piece, ultra plush, removable, and washable comfort liner made of anti-microbial moisture wicking material for a dry, comfortable feel - Adjustable, moto-inspired visor with anodized aluminum hardware - Race-inspired styling - CPSC 1203, CE EN 107B, AS/NZS 2063 certified - 5-Star Rated by VA Tech Testing Institute Bicycle Helmet Testing lab

Offering finely tuned trail protection, this trail and enduro mountain bike helmet gives exceptional coverage and features POC's innovative, patent-pending technology to minimize neck injury. Built to ride, all day. Features: - SPIN technology (Shearing Pad INside)—our patent-pending silicone-pad-technology system - Fully wrapped unibody shell to enhance durability and structural integrity - 360° size-adjustment system for the most precise and secure fit - Breakaway visor - Lightweight and well-ventilated Breakaway visor - The novel breakaway visor will snap off the helmet in an impact, thereby minimizing the impact forces that are transmitted to the neck. - The lightweight, well-ventilated Axion SPIN has extended protection zones around the temples and the back of the head for extra coverage where it is most needed.

The Women's Source W MIPS helmet combines advanced performance and protection in a rugged, trail-ready design. Featuring deep coverage with aggressive ventilation from 16 vents coupled with deep internal channeling, it helps keep things cool even when the riding gets rowdy. And with the comfort and secure feel of the Roc Loc 5 fit system with Integrated MIPS brain protection, plus a moto-style adjustable screw-in visor and full lower Hardbody durability, you get a helmet that's capably equipped for fun and adventure. Specs: - Integrated MIPS - Construction: In-mold polycarbonate shell and EPS liner; Polycarbonate Hardbody Lower Shell - Visor: Adjustable moto-style screw-in visor - Ventilation: 16 Wind tunnel vents with internal channeling - Fit System: Roc Loc 5 - Weight: 351g (Size Medium CPSC); 340g (Size Medium CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078

- MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain. - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture wicking liner - Includes additional pads for custom dialed fit

The Proframe helmet is the lightest and most breathable full face helmet Fox has ever created. Designed to perform at the highest levels for the aggressive all mountain rider and enduro racer, it packs DH certified protection into a superlight shell via Fox's patent-pending, fully-integrated Chinbar. With 24 Big Bore vents, the Proframe offers open face level airflow and breathability to keep you cool on even the longest and most challenging climbs; and once you reach the top, it gives you the confidence to ride to your limits on even the toughest of descents. Features: - Ultra-lightweight enduro and all mountain helmet - Patent pending integrated chinbar - Highly breathable, moisture wicking and anti-microbial liner - 24 Big Bore vents for unrivaled breathability - Fixed visor is positioned perfectly for maximum air flow - Fidlock SNAP helmet buckle provides quick entry and exit - MIPS™ impact protection system reduces rotational forces in a crash - Dual density Varizorb EPS liner provides improved protection - Our lightest DH certified helmet: 750g. (size medium) Certifications: - ASTM F1952 (including chin bar rigidity test) - EN 1078 - AS/NZ 2063 - CPSC

Performance-focused open-face trail helmet - MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2 liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3 position adjustable visor - 360°Fit System allows you to dial in your perfect fit every ride - EPS, PC, PA, Polyester

- MIPS' added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture wicking liner - Includes additional pads for custom dialed fit - EPS, PC, PA, Epp, Polyester

The Aether MIPS combines airy, open design with a revolution in rotational energy management to advance head protection for cyclists. Inside the Aether, a dual-density EPS foam liner helps to manage a wide range of impact energies, while also boasting deep internal channeling to provide cooling airflow. Giro's proprietary MIPS Spherical technology is integrated between the layers of EPS foam – instead of against the rider’s head – giving riders the benefits of MIPS without any obstruction to comfort or cooling power. Outside, a sleek 6-piece shell forms a stunning silhouette around the massive vents, which get added structural reinforcement via a shatter-resistant AURA reinforcing arch. The final touch is Giro's Roc Loc 5+ Air fit system, featuring 3-way fit tuning, that allows easy adjustment in seconds for the ultimate in comfort.

Key Features: - Mips® equipped - Virginia Tech 5-Star helmet rating - Goggle-compatible, 3-position visor - 360° Fit System to dial in fit - Fast and simple FIDLOCK magnetic buckle Performance-focused open-face trail helmet The Speedframe Pro Blocked Helmet earned Virginia Tech's best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set. Specifications: - Mips® added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb™ EPS provides improved protection by spreading forces of impact across a wider area - FIDLOCK SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable, washable XT2® liner is antimicrobial and manages odor while wicking moisture away from the head - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle-compatible, 3-position adjustable visor - 360° Fit System allows you to dial in your perfect fit every ride

Lumos is the world's first smart bike helmet that beautifully integrates lights, hard brake, turn signals, and helmet into a single cohesive whole.

Our maximum coverage trail helmet featuring ear protection and open face ventilation. - MIPS’ added protection system has been proven to reduce the rotational motion when implemented in a helmet by absorbing and redirecting energies and forces otherwise transmitted to the brain - Dual-density Varizorb EPS provides improved protection by spreading forces of impact across a wider area - 8 Big Bore vents and 7 exhaust vents keep you cool and aid in moisture management - The securely fixed visor is positioned to channel airflow into the Big Bore vents - Fidlock SNAP helmet buckle provides quick and secure entry and exit while wearing gloves - Removable antimicrobial and moisture-wicking liner - Includes additional pads for custom dialed fit

With a sleek and fast look, the Echelon helmet presents a compact profile on a rider's head. And with increased ventilation and an ergonomic design, you're guaranteed an exceptional fit, tremendous comfort, and ample ventilation. Accordingly, it's the ideal helmet for road cycling enthusiasts. - 4th Dimension Cooling System optimizes ventilation. - Composite matrix internal reinforcement allows larger vents for greater cooling. - Easy-adjust Headset SL II fit system with six height positions and micro-adjustable dial. - Fit system is ANGi crash sensor ready. - MIPS-equipped. - Reflective decals for increased visibility to motorists in low-light conditions. - Tri-Fix web splitter for improved comfort and ease of strap adjustments.

New for 2020, the Street collection combines the industry leading safety feature MIPS with all new Nutcase inspiring designs. Featuring an improved retention system to provide a secure, comfortable fit and 2x the reflectivity for visibility on the road. 11 redesigned air vents increase the airflow to keep your brain cool and 30+ new designs to keep you looking even cooler. - Featuring the industry leading MIPS Safety Feature for best in class protection - High performing injection molded ABS shell and tuned EPS foam to keep you safe on the road - Improved ventilation to keep you cool - Premium Fidlock magnetic closure for one handed snap and go buckle - 3 piece internal heat sealed pads to provide next to brain comfort - Simple dial adjustable fit system provides safety, individualized fit and comfort - 2x reflectivity for increased visibility on the road - 3 sizes: Small (52cm-56cm), Medium (56cm-60cm), Large (60cm-64cm) - CPSC 16 CFR 1203 and ASTM F1492 Certified - Visor Included

The Session helmet is designed for trail riders that demand the balance of style, protection and ventilation. Koroyd is featured in strategic, zonal impact areas giving riders the confidence they need to charge harder. The top of the helmet has massive airports which combine with internal air channels to allow for maximum airflow and ventilation. The Session features channels on the front of the helmet for easy eyewear storage, and the three-position visor rotates high to allow for goggle storage. - Lightweight Aerocore in-mold construction - Zonal ventilated protection featuring patented Koroyd material - Integrated skeletal structure - VaporFit adjustable fit system - 15 optimized vents - XT2 anti-bacterial performance lining - Ultra-light single layer webbing - AirEvac ventilation - Ultimate sunglass and goggle integration - Camera and light mount compatible - Three-position adjustable visor - Weight (Size M) 13.05oz / 370 grams - Certification: CPSC, CE EN 1078 Sizing - Small: 51 – 55cm - Medium: 55 – 59cm – Large: 59 – 62cm

Giro design, and high-performance innovation for core road cyclists, gravel enthusiasts, and adventure riders. Advanced Performance for the Adventurous The heart of the Helios's extraordinary design and performance is Spherical Technology, which utilizes a ball-and-socket design powered by MIPS, the market-leading brain protection system that can help to reduce rotational forces. Spherical Technology allows the helmet's outer liner to rotate around the inner liner during a crash, and also allows Progressive Layering of the inner and outer liners to provide more comprehensive protection and performance. In addition to advanced head protection, the Helios's 15 Wind Tunnel vents provide exceptional cooling power that's enhanced by our patented Roc Loc 5 Air fit system and plush, antimicrobial XT2 padding for exceptional sweat absorption. It's the ideal match for your road and gravel adventures. Specs: - Impact Management: Spherical Technology, Powered By Mips - Construction: Independent, in-mold liners with spherical ball-and-socket design, Polycarbonate Shell, Hardbody Lower Shell - Ventilation:15 wind tunnel vents with internal channeling - Fit System: Roc Loc 5 Air - Weight: 270 (Size Medium CPSC, CE) - Certification: Complies with the US CPSC Safety Standard for bicycle helmet for persons age 5 and older E.U.: CE EN1078 - Highlights: Nanobead EPS Foam, Coolfit Antimicrobial Padding, Slimline Webbing, Four-piece shell w/lower hardbody

Designed with input from our pro mountain bike athletes, the Speedframe Pro Helmet has earned Virginia Tech#s best rating (5 STARS) in its Bicycle Helmet Ratings program for a reason. This top-tier open-face mountain bike helmet offers a market-leading feature set to keep you protected every time you hit the trails. Top of that list is Mips, designed to reduce rotational motion and redirect forces away from your brain should you crash. Dual-density Varizorb# EPS bumps up that impact protection further by spreading forces of impact across a wider area. The 360-degree fit system and Fidlock SNAP helmet buckle ensure a perfect fit every time you ride, with a buckle that's a cinch to open and close, even with gloves on. The XT2 liner is antimicrobial and manages odor while wicking moisture away from the head, and is easily removed and washed should it need it. Goggles pair well with the Speedframe Pro Helmet too, thanks to the 3-position adjustable visor. If you're looking for a performance-minded trail helmet, congratulations#you just found your new lid.

Trail riding is more aggressive than ever, so you need a helmet that gives you the confidence to take on downhill runs on a five-inch travel trail bike. Say hello to the Tactic III. It has protection covered in spades, while our 4th Dimension Cooling System handles ventilation to keep your wig cool. Keeping in this spirit, the Tactic III has been redesigned to also be lighter than ever, all while keeping its pedigree of protection. This means that you get a tried-and-true trail helmet that gets you to the top of a climb and protects you on the way down. That's what it's really all about, right? - Versatile HairPort SL II fit system, with six height positions and a micro-adjustable dial, makes it easy to adjust the fit - 4th Dimension Cooling System optimizes ventilation - In-molded shell improves strength and reduces weight - Extended rear coverage for added protection in technical, all mountain terrain - Full-size visor with easy on/off aFIX visor attachment - Tri-Fix web splitter for improved comfort and ease of strap adjustments - MIPS-equipped - Fit system is ANGi crash sensor ready

When ripping down the trail, the last thing you need to worry about is if your helmet will protect you in a crash. Then again, you don't want to be stuck wearing a full-face on every trail ride. This is why we created the Ambush Comp—a lightweight, extended coverage helmet at a wallet-friendly price. Starting with protection, the Ambush Comp boasts a significant amount of extended coverage and a single density foam that's been reinforced by a Composite Matrix. The reason behind this is that it manages the energy from impacts more effectively. Even with the added protection, though, it fits comfortably with our low profile and fully integrated Mindset 360 fit system. And with its five height positions, this system provides unmatched adjustment, while an integrated dial allows for on-the-fly fine-tuning. The Ambush Comp also keeps you cool with our 4th Dimension Cooling System's massive vents and exhaust ports, so you don't have to worry about overheating—even on the hottest days. Finally, we included a micro-indexing visor that quickly adjusts positions and has plenty of room for goggle storage. Combined, these features put the Ambush Comp well in front of the competition. Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - MIPS-equipped. - Composite Matrix internal reinforcement allows large vents for greater cooling. - In-molded shell improves strength and reduces weight. - Mindset 360 fit system provides a secure, comfortable fit with 360-degree tension adjustment, five height positions, and integrated dial for easy on-the-fly adjustments. - Micro indexing visor allows for a wide range of fast, secure on-trail adjustments, as well as convenient goggle stowage. - 4th Dimension Cooling system optimizes ventilation. - Extended coverage for added protection and durability. - Tri-Fix web splitter for improved comfort and ease of strap adjustments. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor. - Our available aftermarket ANGi sensor gives you and your loved ones peace of mind like never before. When combined with our Specialized Ride app, the ANGi sensor will evaluate the forces acting on the helmet in the event of an accident and, if necessary, send a text message to your specified contacts with your location.

Cooler, Faster in a Protective Package The trailblazing A2 is Troy Lee Designs' MTB trail helmet that checks all the boxes. Its stylish shell not only incorporates huge intake and exhaust ventilation ports, but it also comes with the very best in impact protection. From breakaway visor screws and the innovative MIPS system and an industry-first dual-density EPP + EPS liner that protects against both high- and low-speed impacts; this is a helmet that doesn't take your safety lightly. Add in an adjustable strap and X-Static Pure Silver comfort liner, and the comfort is every bit on par with the protection. Specifications - Huge air intakes - 25% larger than A1 - connected to massive exhaust ports through deep internal channels provide powerful cooling efficiency - MIPS brain protection system reduces rotational forces to the brain in some crash scenarios - Dual-density EPS co-molded with EPP for state-of-the-art impact energy management at low- and high-crash speeds, as well as everything in between - Rear stabilizer fit system with flexible, slimline arms has 3-position front and rear locations for a custom fit - Adjustable strap dividers for a perfect fit every time - 350 grams (size M/L) - CPSC 1203, CE EN 1078, AS NZ 2063:2008