Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Assorted Bicycle Parts

$17.99
Genuine replacement parts
Get back on the road with a quality replacement hanger.
Original equipment replacement rear derailleur hanger.
- Original replacement rear derailleur hanger
- For use with 2008-2010 Trek Madone

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$14.99
Profile Design's Gap Cap works with 1" or 1 1/8" steer tubes to keep your headset adjusted properly at all times. The composite wedges are a fantastic choice for carbon steerers, and at 30-45 grams, you'll keep the front end of your bike super light.

$3.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$3.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function

$23.88 - $26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$36.95 - $46.95
$95.00
Up to 61% Off
The Ohlins Stumpjumper Spring sets a new benchmark for spring rate accuracy and light weight for steel springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 4 N/mm (23 lbs./in).
- Fits Ohlins TTX shock absorber for Stumpjumper FSR only.
- Made with proprietary ultra lightweight steel, it's incredible for keeping your build weight down for trail riding.

$34.95
$95.00
63% Off
The Ohlins RXF 36 Coil Fork Spring sets a new benchmark for spring rate accuracy and light weight for trail and all-mountain fork springs.
- Ultra-fine spring rates to ensure perfect set up for all weights.
- Spring rates are broken down to 0.9 N/mm (5 lbs./in).
- Fits Ohlins RXF Coil fork only.

$11.25
$15.00
25% Off
The Command Post SRL Clamp moves the Command Post's lever into the position where the front shifter would normally go, giving you more control.
- Hinge clamp for easy installation.
- Lightweight alloy clamp with steel bolt.
- Lightweight alloy clamp with steel bolt.

$29.95
$60.00
50% Off
The SRL lever gives riders with 1x drivetrains the option to control their Command Post with lever option that mounts beneath the bar in place of a front shifter.
- Command Post lever for the modern 1x drivetrain systems.
- Adjustable lever position allows for the perfect set up.
- Sealed cartridge bearing pivot for smooth action.
- Ideal pull ratio for easy lever activation.
- Requires additional mounting hardware (SRAM MatchMaker or equivalent is recommended).

Bolts, clamps and washers for Thomson Seatposts and Seat Clamps.
- Sold individually, includes bolt, washer and nut

$17.99
Original equipment replacement rear derailleur hangers.
Get back on the road with a quality replacement hanger.
Product details
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications
- Mounting location: Rear drive side
- Attachment: 1-bolt

$5.99
Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

$22.00
Lip-Locks secure your seatpost and add functional bling to your ride.
- Non-quick release version of the Flip-Lock
- Machined 6061-AL with stainless steel pivot and bolt
- Anodized with laser-etched logo
- For smooth operation, lightly grease the bolt threads

$9.99
Switching frames doesn’t mean you have to switch posts! Use your old posts without worry with Problem Solver's wide variety of seatpost shims.
-100mm long
-3mm lip
-Alloy
Problem Solvers Seatpost Shims are not intended for use with carbon seatposts

$36.95
$95.00
61% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs.
- Precise spring rates are broken down to 4 N/mm (23 lbs./in).

$36.95
$95.00
61% Off
The new generation spring series features a race-ready weight with big mountain strength. You'll also find advanced technologies that feature a multi-step surface treatment process, as well as cutting-edge heat treatments. Lastly, we use wire materials that allow us to stress the wire harder, without causing damage to the spring, and therefore design lighter springs.
- Precise spring rates are broken down to 4 N/mm (23 lbs./in).

$82.00
Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$28.00
These pucks attach the Old Man Mountain rack frame to the front or rear of your mountain or fat bike. They provide a secure upper attachment point for the rack. Included in the packet are heavy-duty zip ties, clear protective film, and mounting hardware. Designed for use with carbon, steel, titanium, and aluminum bikes and forks. Slots in the puck also allow for use with metal hose clamps (not intended for carbon bikes). Pucks can be left on the bike for future reinstallation of the rack.
Recommended for use only with specific Panduit brand 120 lbs zip ties. Panduit #BT2LH-TL0.
- One size fits all mountain and fat bikes
- For use on either rear seatstay or front fork
- Made from a carbon resin composite for lightweight strength
- Includes heavy-duty zip ties with stainless steel tangs (extra zip ties included)
- Includes clear protective film
- Hardware included

$42.00
One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity.
- Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability
- Dual scraping lip design provides maximum scraping effect while minimizing friction
- Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability
- High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity
- Molded utilizing precision 3D machined molds for exact tolerance

$42.00
One of the single biggest improvements you can make to your fork. Engineered and developed over several years, the PUSH Ultra Low Friction fork seals provide class leading sealing while offering incredibly low friction, resulting in an increase in small bump sensitivity.
- Advanced friction-reducing, Molybdenum filled material increases small bump sensitivity while also increasing durability
- Dual scraping lip design provides maximum scraping effect while minimizing friction
- Loaded oil sealing lip integrated into wiper to keep lower leg fluid from escaping fork, increasing performance and durability
- High-volume, absorbent foam rings ensure consistent lubrication improving seal life and bump sensitivity
- Molded utilizing precision 3D machined molds for exact tolerance

$36.99
- Superior sealing performance across a wide range of aftermarket applications
- Integrated dust sealing lip is designed to guard against dirt and water entering fork preventing contamination and increasing performance
- Integrated oil sealing lip preve

$6.95
The Stem Shim Adapter helps to accommodate different diameter steerer tube and stem clamp combinations.

$9.95
Carbon head set spacers for 1-1/8" steerer.
- For 1-1/8" steerer
- 10mm thick
- 2pcs per bag
- 33mm OD

$9.95
Featuring a tasteful TR logo, this top cap perfectly matches the graphics on all new Ritchey WCS stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included.
- Material: alloy
- Includes top cap, bolt, and plastic cap
- Fits 1-1/8" stems
- Weight: 8g

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance.
- OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application.
- These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399)
- CNC machined 6061 aluminum
- Made in the USA

$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included

$18.95
Saddle rail clamp outer-pieces to adapt Ritchey WCS Carbon 1-bolt posts to various saddle rail dimensions.
- To retrofit WCS 1-Bolt carbon seatpost
- Material: 7050 alloy

$21.95
Genuine cartridge Ti-coated bearing for Ritchey WCS headset.
- 45/45 degree angular contact bearing
- Titanium-coated for corrosion resistance

$21.99
absoluteBLACK's Chain Catcher is designed to eliminate the possibility of the chain falling in towards the frame when shifting to the inner chainring on uneven road. Chain Catcher is a simple add-on component which improves the overall function of your drive train and protects your valuable frame from dropped chains. Especially recommended for carbon frames.
No matter how well you set up the front derailleur with round or oval rings, there is always a possibility that chain may find its way to drop on the frame when you shift quickly from outer ring to inner one. Especially on rough or gravel roads. Mounting the Chain Catcher in front of the front derailleur will prevent such occurrence from happening because the chain will be guided precisely onto the small ring and will not be able to go any further towards the frame.
Our Chain Catcher has a conical tapered head, providing an excellent fit to braze-on mounts that are integrated with frame. However, with older frames you may use a clamp braze-on adapter. In such case please ensure that your adapter has a front face also conical (not flat).
Unlike the majority of chain catchers on the market, absoluteBLACK's Chain Catcher can be precisely adjusted to ensure only minimal gap is left to the inner chainring for maximum security.
- Mass/Size: 11.6g / one size fits all
- Compatibility: All braze-on frames and derailleurs.
- Adjustability: 6mm chainline adjustment provided on the slot for precise setup
- Material: CNC machined 7075 T6 / M5 stainless steel bolt
- Finish: type II anodizing

$19.99
Rebuild seal kits for Fox rear suspension service and repair.
- Includes parts needed for rebuild

$17.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For specific compatibility concerns, please contact our Customer Service team
Specifications:
- Size: Rear drive side, 135mm Q/R
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$7.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function

$52.99
Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.
- Cane Creek Hellbender Bearing, 52mm SHIS