Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Assorted Bicycle Parts

$334.00
Transform your existing Fox 36 suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally!
- Reduced friction for smoother overall fork performance
- Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel

$325.00
Transform your existing RockShox Pike, Lyrik or Yari suspension fork into the ultimate trail fork. The ACS3 coil conversion kit combines small bump sensitivity, traction, and mid stroke support of a coil with the big hit performance of an air spring. By using coil springs, you can eliminate the constant maintenance required to keep your fork running optimally!
- Reduced friction for smoother overall fork performance
- Air Bump Stop cartridge technology to control the bigger hits towards the end of the travel

$237.00
Giant's Connect SL U-Bend Carbon Aerobar Extension is for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the U-Bend. Thanks to carbon construction, this is a featherweight and super-stiff bar. Plus, it has 70mm of fore/aft adjustment to dial in your ideal aero position.

$122.00
Giant's Connect SL S-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the S-Bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

$122.00
Giant's Connect SL Ski-Bend Carbon Aerobar Extensions are for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the ski-jump bend. Thanks to carbon construction, these are featherweight and super-stiff extension bars. Plus, they have 70mm of fore/aft adjustment to dial in your ideal aero position.

$111.00
- Lever Assembly, Aluminum lever Gen 2, Black Ano (assembled, no hose, and includes barb and olive), Guide RSC

$88.00
The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation.
- Can be mounted above or below handlebars
- Great match for SRAM 1x drivetrains
- Tall clamp allows OneLoc to easily fit non-SRAM components

$82.00
Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 217—229mm thru axle with 1.0 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$82.00
Fit Kit SET808 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle.
This kit includes:
- 12 x 223—229mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$80.99
• Converts a cassette hub to a single speed
• 8 spacers included in various sizes to adjust chain line
• Anodized 6061 aluminum
• Fits Shimano/SRAM cassette bodies
• Conical spacers for increased cog stiffness
• Includes single-speed guide, spacers, as well as 18T & 16T cogs

$80.00
Fit Kit SET814 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle.
This kit includes:
- 12 x 169—178mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$80.00
Fit Kit SET704 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 155 mm thru axle with M14 x 1.5 mm thread pitch to fit Fox Boost forks (may fit others as well)
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$80.00
Fit Kit SET701 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 148 mm thru axle with M15 x 1.5 mm thread pitch to fit Rock Shox forks (may fit others as well)
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$80.00
Fit Kit SET703 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 158mm thru axle with 15 x 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$80.00
Fit Kit SET715 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to your fork with a 15 mm thru axle.
This kit includes:
- 15 x 198mm thru axle with 1.5 mm thread pitch
- A pair of pucks
- Clear protective tape
- Stainless steel mounting hardware
- Axle mounting increases our rack's load capacity to 70lbs/33kg
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.

$76.99
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

$75.00
Service your DT Swiss star ratchet hubs and wheels with DT Swiss Ratchet and Kits.
- DT Swiss 18t Superlight Star Ratchet Kit: Includes Springs and Grease

$74.99
$100.00
25% Off
Mate Specialized's Clip-On Clamp to a pair of aero extension bars and get time on your side. Their 22.2mm diameter is compatible with many standard aftermarket extensions, and with a one-bolt hinge system, they're simple to install.

$70.00
EPS chargers and charger accessories specifically designed for charging all Campagnolo V2 and V3 batteries.
- Extension cable is 50cm long
- Requires use of EPS Power Unit Charger

$69.99
An essential part of any passenger-carrying system is something they can hold for balance. The Globe Passenger Handlebar bolts to the top of the Haul rear racks to provide passengers of all ages with a comfortable and safe grip. The reversible and versatile design can be mounted anywhere along the rack for a fully customizable setup.
**For Globe Haul ST: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. **
- Designed for frictionless compatibility with the Globe Haul ST and Haul LT.
- All tools required for assembly are included with the purchase of the Haul ST or Haul LT bike.

$69.99
ReMote Dropper Lever
- Lever pivots on a 21mm ball bearing for smooth operation
- Cable Kind Clamp does not damage secured cables and features captive hardware.
- Includes barrel adjuster for on the fly changes
- Engineered break-away pivot that allows the lever to break away from the pivot in the event of a crash.

$68.25
BB30 service kit includes (2) Enduro 6806 ABEC-5 Angular Contact sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems

$65.99
RockShox Reverb Stealth Full Service Kit for A2 generation Reverb Stealth dropper seatposts
- Includes Blue 1-Piece U-Cup Seal Internal Floating Piston (IFP)
- Rebuilds IFP, Poppet, Seal Head, Dust Seal, Piston, Brass Keys, and Bushing
- For "A2" designated posts, 2013-2016 Includes new Internal Floating Piston (IFP)
- Requires RockShox Reverb Rebuild Tools: Post Bleed Tool, Oil Height Tool, IFP Height Tool
- For "A2" designated posts, 2013-2016
- A2 posts have a black return speed adjuster on the remote and no laser-etched logos on stanchion by the saddle cradle
- Updated service kit as of 06/2016

$64.99
Pro Compressionless brake housing eliminates flex from cable actuated braking systems, increasing power and improving lever feel.
- KEB-SL - linear strand, Kevlar reinforced, compressionless brake housing with Slick-Lube liner
- Perfect for full-housing, high-performance bikes with mechanical disc or rim brakes
- 20 black alloy lined end caps, 10 black POP end caps included

$63.00
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)

$63.00
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)

$63.00
Replacement cartridge for Contact Switch & Contact Switch S dropper posts.
- Fits: Giant Contact Switch Post- Gen 1 (2018+)

$62.00
Fit Kit SETQRF contains all the parts to mount the rack to the front of a road or mountain bike with a 9 x 100mm quick-release hub.
This kit includes:
- 9 x 100mm QR Skewer
- A pair of pucks
- Clear protective tape
- all mounting hardware
- Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts
- Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame
We partner with The Robert Axle Project to supply our thru axles.
Page 1 of 12
Next page