Free Shipping on orders over $50

Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Model Years
  • Show Fewer Model Years

Stems

Bontrager Elite Blendr Stem
$64.99
Stiff and light with the cleanest accessory solutions available When all you need is the right position, the Elite stem gets it done and more. The strong and light alloy stem is your bike's best workhorse and also features Blendr accessory integration for a sleek setup. Key features - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Safe for use on carbon steerer tubes and handlebars - Includes one Blendr base to integrate Ion lights and Trip computers.
Bontrager Elite Blendr Stem
$59.99 - $64.99
The Bontrager Elite Blendr Stem provides easy solutions for accessory integration. This alloy stem is light and strong, and it gives you endless options to integrate lights, a computer, and more with Blendr Elite accessory integration. - Seamless accessory integration with Blendr Elite - 6061-T6, 3D, forged alloy construction - 4-bolt dual band clamp retains stiffness and reduces weight - Opposing 2-bolt steerer tube clamp - Uses M5 countersunk, corrosion-resistant steel bolts with 5.2Nm torque spec - Approved for carbon bars and steerer tubes - Includes one Blendr base to integrate Ion lights and Trip computers
Race Face Turbine Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Thomson Elite X4 Mountain Stem
$99.95 - $109.95
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Parlee Cycles Stem
$325.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Cannondale Headshok Stem
$55.99 - $65.00 $61.99 - $65.00 Up To 10% Savings
Designed for use with Cannondale's Headshok (sold separately), the Headshok Stem is tough, light, and ready to ride. - Sleek styling with maximum strength and stiffness - Forged from a single block of lightweight 2024 aluminum with our patented OPI 3D forging process, these stems are exceptionally light and strong - 31.8mm clamp interface - Weight: 185 grams (100mm length)
Bontrager XXX Blendr Stem
$275.00
OCLV Carbon construction of the XXX Blendr stem combines lightweight strength with a classy aesthetic. Captured titanium hardware ensures you never drop bolts again, and the dual-banded faceplate shaves weight and blends perfectly into mounted accessories with the Blendr integration system. - Ultra-light OCLV Carbon construction - Flush-fit 4-bolt dual band bar clamps offer seamless look - Captured Titanium screws save weight while making installation easy - Integrate accessories with included Blendr Mono Base and Blendr Ion and Garmin mounts - Mounts available for use with Ion and Trip, Garmin, GoPro, and SRM accessories - Approved for carbon bars and steerer tubes
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
TruVativ Descendant Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Easton EC90 SL Stem (10-degrees)
$249.99
Bolt Easton's EC90 SL Stem to your road bike and watch the grams disappear. This ultra-light carbon beauty sports Easton's TaperWall technology to provide the perfect balance of low weight, high strength and stiffness for excellent steering control in all conditions. Plus, Easton's Top Lock and Distributed Stress technologies lock the stem and faceplate together, allowing for a highly rigid interface while minimizing loads on the bolts, making the EC90 SL perfectly safe for carbon bars. What's more, the EC90 SL uses titanium hardware to keep weight to an absolute minimum.
Race Face Atlas
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Chester 35
$54.99
RaceFace's Chester 35 Stem is a practical stem with 2 length options and that legendary bomb-proof Race Face toughness baked right in. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Stack Height: 42mm
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Race Face Aeffect
$35.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Ritchey Classic C-220 Stem
$69.99
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Zipp SL Sprint Stem
$265.00
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Easton Havoc 35 Stem
$99.99
Just when you thought a stem couldn’t get any more burly and beautiful, Easton drops the Havoc 35. It's bigger and badder with a handlebar clamp diameter of 35 millimeters. The increased clamp diameter delivers more strength, stiffness and security than conventional 31.8 stems. This stem is fully CNC machined from a massive chunk of aluminum and features a host of clever designs like Easton's Top Lock Technology and Distributed Stress Technology to remove stress risers and eliminate rocking caused by floating faceplates. So go ahead, take the hard line, the Havoc has your back.
Ritchey WCS C-220 Stem
$89.99
You really can have it all; Ritchey's WCS C-220 stem features game-changing stiffness, and is quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Blatte Finish - 121g (110mm)
Vision Sizemore Stem
$69.99
Vision's Sizemore Stem is made of light and durable forged and CNC-machined 6061 T6 aluminum with a 2-bolt front clamp for easy handlebar installation even with clip-on aero bars. This fine stem includes tough M6 bolts and flip/flop graphics that look right whichever way you install the stem.
Ritchey WCS Carbon Bullmoose Handlebar
$299.95
- Rebirth of the iconic bar/stem combo - Carbon monocoque with alloy steerer clamp - Steerer diameter: 1-1/8" - Stem length: 70-110mm - Rise: 6 deg - Width: 720-740mm - Back sweep: 9 deg - Color: UD carbon - Weight: 285g
Specialized S-Works CLP Multi Stem
$50.00
Thanks to an ingenious system of shims you slip over your fork, Specialized's S-Works CLP Multi Stem is adjustable in 2-degree increments for a perfect fit on your road or mountain bike and optimum ergonomics. Forged and CNC'd from 7050 aluminum for excellent lightness and strength, the S-Works CLP Multi Stem also boasts titanium bolts, a carbon top cap and a 4-bolt carbon/aluminum faceplate that's compatible with carbon and aluminum handlebars. - 4° is adjustable from 4° to 12° - 12° is adjustable from 8° to 16° - 17° is adjustable from 13° to 17°
Specialized S-Works CLP Multi Stem
$50.00
Thanks to an ingenious system of shims you slip over your fork, Specialized's S-Works CLP Multi Stem is adjustable in 2-degree increments from +/- 8 degrees to +/- 16 degrees for a perfect fit on your road or mountain bike and optimum ergonomics. Forged and CNC'd from 7050 aluminum for excellent lightness and strength, the S-Works CLP Multi Stem also boasts titanium bolts, a carbon top cap and a 4-bolt carbon/aluminum faceplate that's compatible with carbon and aluminum handlebars. - 4° is adjustable from 4° to 12° - 12° is adjustable from 8° to 16°
Odyssey RAFT Stem
$64.99 - $74.99
Using Odyssey's popular TL48 stem as a springboard, Broc Raiford's signature RAFT stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Odyssey TL48 Stem
$74.99
The Odyssey TL48 stem is made from 6061 Aluminum, has minimal branding and comes with a 48mm reach. The shorter 48mm reach is right in line with the needs of street riders today. Odyssey pre-load bolts sit flush with stem when mounted correctly. Simple and clean. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined SPECS - 48mm reach - 33mm rise or -1.5mm when flipped - 10.4 oz (294.8g)
3T Integra LTD (-10-degrees)
$349.99
3T's Integra LTD stem is the perfect solution for any Garmin Edge owner. A Garmin-specific mount is built into this stiff, streamlined stem to keep your cockpit tidy and aero. The Integra's carbon construction keeps it rigid and light for sprints and climbs alike. If you're not riding with your Garmin, or if you don't even own one, the Integra can be fitted with its front end plate for an even more aerodynamic look.
Thomson Direct-Mount Stem
$109.95
With the best materials and construction, torsional stiffness fit for the hardest riding and biggest jumps, and the great style that's in all of Thomson's components, their Direct-Mount Stem is the perfect upgrade for your DH rig. It's made of tough 7000-series aluminum bar stock with heat-treated bolts and it has a 65mm-wide handlebar clamp so you get rock-solid steering and control and outstanding durability.
TruVativ Stylo T40 Stem
$96.00
TruVativ's feathery Stylo T40 Stem is 3D forged from 7050 aluminum for that perfect balance of light weight, stiffness and precision steering control on the trail. Six titanium bolts secure this stem to your fork and bars and keep the weight down, too. Plus, with four different lengths and two color options, you're sure to find the perfect stem with which to crown your ride.
TruVativ Stylo T20 Stem
$40.00
TruVativ's Stylo T20 stem is 3D forged for that perfect balance of light weight, stiffness and control on the trail. Four bolts securely attach the face plate and make changing out handlebars a breeze.
Zipp SL Speed Stem
$265.00
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Page 1 of 5 Next page